On Fri, Feb 08, 2019 at 05:15:33PM +0100, Martin Kepplinger wrote:
> Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead
> of the old API. The st1232_ts_power() now passes on the inverted "poweron"
> value to reflect the correct logical value.
>
> Signed-off-by: Martin Kepplinger <martin.kepplin...@ginzinger.com>
Applied, thank you.
> ---
>
> ok. tested. If i get that right, assigning different gpio functions
> would now be difficult, but afaik isn't needed anyways.
>
> thanks
> martin
>
>
>
> revision history
> ----------------
> v2: retain dts compatibility by allowing current reset-gpios setting
>
>
> drivers/input/touchscreen/st1232.c | 22 ++++++++++------------
> 1 file changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/touchscreen/st1232.c
> b/drivers/input/touchscreen/st1232.c
> index 634d6c243845..1fbc0847416b 100644
> --- a/drivers/input/touchscreen/st1232.c
> +++ b/drivers/input/touchscreen/st1232.c
> @@ -45,7 +45,7 @@ struct st1232_ts_data {
> struct i2c_client *client;
> struct input_dev *input_dev;
> struct dev_pm_qos_request low_latency_req;
> - int reset_gpio;
> + struct gpio_desc *reset_gpio;
> const struct st_chip_info *chip_info;
> int read_buf_len;
> u8 *read_buf;
> @@ -142,8 +142,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void
> *dev_id)
>
> static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
> {
> - if (gpio_is_valid(ts->reset_gpio))
> - gpio_direction_output(ts->reset_gpio, poweron);
> + if (ts->reset_gpio)
> + gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
> }
>
> static const struct st_chip_info st1232_chip_info = {
> @@ -215,15 +215,13 @@ static int st1232_ts_probe(struct i2c_client *client,
> ts->client = client;
> ts->input_dev = input_dev;
>
> - ts->reset_gpio = of_get_gpio(client->dev.of_node, 0);
> - if (gpio_is_valid(ts->reset_gpio)) {
> - error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL);
> - if (error) {
> - dev_err(&client->dev,
> - "Unable to request GPIO pin %d.\n",
> - ts->reset_gpio);
> - return error;
> - }
> + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(ts->reset_gpio)) {
> + error = PTR_ERR(ts->reset_gpio);
> + dev_err(&client->dev, "Unable to request GPIO pin: %d.\n",
> + error);
> + return error;
> }
>
> st1232_ts_power(ts, true);
> --
> 2.20.1
>
--
Dmitry
