On Tue, Jan 29, 2019 at 04:55:31PM +0800, Mark Zhang wrote: > Adding documentation for low battery monitor properties: > - maxim,low-battery-dac-enable > - maxim,low-battery-dac-disable > - maxim,low-battery-shutdown-enable > - maxim,low-battery-shutdown-disable > - maxim,low-battery-reset-enable > - maxim,low-battery-reset-disable > > Signed-off-by: Mark Zhang <ma...@nvidia.com> > --- > Documentation/devicetree/bindings/mfd/max77620.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt > b/Documentation/devicetree/bindings/mfd/max77620.txt > index 484b17e4fba5..5fed0a463b80 100644 > --- a/Documentation/devicetree/bindings/mfd/max77620.txt > +++ b/Documentation/devicetree/bindings/mfd/max77620.txt > @@ -142,6 +142,20 @@ Optional properties: > Device supports 100/1000/3000/6000 Ohms. > Default will be set to 1000 Ohm. > > +Low-Battery Monitor: > +================== > +This sub-node configure low battery monitor configuration registers. Device > has > +support for low-battery monitor configuration through child DT node > +"low-battery-monitor". > + > +Optional properties: > + - maxim,low-battery-dac-enable: Enable low battery DAC. > + - maxim,low-battery-dac-disable: Disable low battery DAC. > + - maxim,low-battery-shutdown-enable: Enable low battery shutdown. > + - maxim,low-battery-shutdown-disable: Disable low battery shutdown. > + - maxim,low-battery-reset-enable: Enable low battery reset. > + - maxim,low-battery-reset-disable: Disable low battery reset.
Do you really need 3 states with the 3rd being prop not present. Rob
