From: Hou Zhiqiang <zhiqiang....@nxp.com>
The reset value is all zero, so set a workable value for Primary,
Secondary and Subordinate bus numbers.
Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
Reviewed-by: Minghuan Lian <minghuan.l...@nxp.com>
---
V3:
- No change
drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/controller/pcie-mobiveil.c
b/drivers/pci/controller/pcie-mobiveil.c
index db7ecb021c63..9210165fe8c0 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
u32 value, pab_ctrl, type;
struct resource_entry *win;
+ /* setup bus numbers */
+ value = csr_readl(pcie, PCI_PRIMARY_BUS);
+ value &= 0xff000000;
+ value |= 0x00ff0100;
+ csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
/*
* program Bus Master Enable Bit in Command Register in PAB Config
* Space
--
2.17.1
