Signed-off-by: saumah <sau...@gmail.com>
---
8250_pci.c | 162 +----------------------------------------------------
1 file changed, 2 insertions(+), 160 deletions(-)
diff --git a/8250_pci.c b/8250_pci.c
index f80a300..310b1eb 100644
--- a/8250_pci.c
+++ b/8250_pci.c
@@ -519,115 +519,6 @@ static int pci_siig_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, 0);
}
-/*
- * Timedia has an explosion of boards, and to avoid the PCI table from
- * growing *huge*, we use this function to collapse some 70 entries
- * in the PCI table into one, for sanity's and compactness's sake.
- */
-static const unsigned short timedia_single_port[] = {
- 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
-};
-
-static const unsigned short timedia_dual_port[] = {
- 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
- 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
- 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
- 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
- 0xD079, 0
-};
-
-static const unsigned short timedia_quad_port[] = {
- 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
- 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
- 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
- 0xB157, 0
-};
-
-static const unsigned short timedia_eight_port[] = {
- 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
- 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
-};
-
-static const struct timedia_struct {
- int num;
- const unsigned short *ids;
-} timedia_data[] = {
- { 1, timedia_single_port },
- { 2, timedia_dual_port },
- { 4, timedia_quad_port },
- { 8, timedia_eight_port }
-};
-
-/*
- * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
- * listing them individually, this driver merely grabs them all with
- * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
- * and should be left free to be claimed by parport_serial instead.
- */
-static int pci_timedia_probe(struct pci_dev *dev)
-{
- /*
- * Check the third digit of the subdevice ID
- * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
- */
- if ((dev->subsystem_device & 0x00f0) >= 0x70) {
- dev_info(&dev->dev,
- "ignoring Timedia subdevice %04x for parport_serial\n",
- dev->subsystem_device);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int pci_timedia_init(struct pci_dev *dev)
-{
- const unsigned short *ids;
- int i, j;
-
- for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
- ids = timedia_data[i].ids;
- for (j = 0; ids[j]; j++)
- if (dev->subsystem_device == ids[j])
- return timedia_data[i].num;
- }
- return 0;
-}
-
-/*
- * Timedia/SUNIX uses a mixture of BARs and offsets
- * Ugh, this is ugly as all hell --- TYT
- */
-static int
-pci_timedia_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- unsigned int bar = 0, offset = board->first_offset;
-
- switch (idx) {
- case 0:
- bar = 0;
- break;
- case 1:
- offset = board->uart_offset;
- bar = 0;
- break;
- case 2:
- bar = 1;
- break;
- case 3:
- offset = board->uart_offset;
- /* FALLTHROUGH */
- case 4: /* BAR 2 */
- case 5: /* BAR 3 */
- case 6: /* BAR 4 */
- case 7: /* BAR 5 */
- bar = idx - 2;
- }
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
/*
* Some Titan cards are also a little weird
@@ -2103,42 +1994,8 @@ static struct pci_serial_quirk pci_serial_quirks[]
__refdata = {
.subdevice = PCI_ANY_ID,
.setup = titan_400l_800l_setup,
},
- /*
- * Timedia cards
- */
- {
- .vendor = PCI_VENDOR_ID_TIMEDIA,
- .device = PCI_DEVICE_ID_TIMEDIA_1889,
- .subvendor = PCI_VENDOR_ID_TIMEDIA,
- .subdevice = PCI_ANY_ID,
- .probe = pci_timedia_probe,
- .init = pci_timedia_init,
- .setup = pci_timedia_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_TIMEDIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_timedia_setup,
- },
- /*
- * SUNIX (Timedia) cards
- * Do not "probe" for these cards as there is at least one combination
- * card that should be handled by parport_pc that doesn't match the
- * rule in pci_timedia_probe.
- * It is part number is MIO5079A but its subdevice ID is 0x0102.
- * There are some boards with part number SER5037AL that report
- * subdevice ID 0x0002.
- */
- {
- .vendor = PCI_VENDOR_ID_SUNIX,
- .device = PCI_DEVICE_ID_SUNIX_1999,
- .subvendor = PCI_VENDOR_ID_SUNIX,
- .subdevice = PCI_ANY_ID,
- .init = pci_timedia_init,
- .setup = pci_timedia_setup,
- },
+
+
/*
* Xircom cards
*/
@@ -4375,22 +4232,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi },
- { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
- PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_1_921600 },
- /*
- * SUNIX (TIMEDIA)
- */
- { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
- PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
- pbn_b0_bt_1_921600 },
-
- { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
- PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
- pbn_b0_bt_1_921600 },
/*
* AFAVLAB serial card, from Harald Welte <lafo...@gnumonks.org>
--
2.17.1
