On Tue, Dec 19, 2000 at 05:05:16PM -0700, Jeff V. Merkey wrote:
David,
Do you think there's a solution for this problem. Sorry for bothering
you again. I'm available if you need some help retesting and fixes.
:-)
Jeff
> On Tue, Dec 19, 2000 at 01:51:14PM -0800, David Hinds wrote:
> > On Tue, Dec 19, 2000 at 03:41:29PM -0700, Jeff V. Merkey wrote:
> > >
> > > On a related topic, the 3c575_cb driver on an IBM Thinkpad 765D is getting
> > > tx errors on the 2.2.18 kernel with PCMCIA services 3.1.22.
> > >
> > > Card is a 3Com 3CCFE575BT Cyclone Cardbus Adapter.
> > >
> > > Error is:
> > >
> > > eth0: transmit timed out, tx_status 00 status e000.
> > > diagnostics net 0cc2 media a800 dma 000000a0
> >
> > What host bridge is in the 765D? Is it perhaps a TI 1131 rev 1, or
> > something else? Also, try adding:
> >
>
> /proc/bus/pccard/00/info reports TI 1130 chipset.
>
> > module "3c575_cb" opts "down_poll_rate=0"
>
> Adding this does not fix the problem, but does cause a little more
> error info to get printed. Now in addition to the original message,
> I am also seeing:
>
> eth0: Tx ring full, refusing to send buffer.
>
> Looks like some type of interrupt problem. I am available to assist
> you in debugging this problem.
>
> Jeff
>
> >
> > to /etc/pcmcia/config.opts and see if that makes any difference.
> >
> > -- Dave
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [EMAIL PROTECTED]
> > Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
