Hi, the following Patch breaks hdmi (at least) on Bananapi R2 (mt7623):
a9bf2eec5a6fc01a0a5250eaf0bf61dfd382a78a "iommu/mediatek: Use helper functions to access dev->iommu_fwspec" https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/iommu/mtk_iommu_v1.c?id=a9bf2eec5a6fc01a0a5250eaf0bf61dfd382a78a [ 5.363509] Backtrace: [ 5.365946] [<c05a6010>] (mtk_iommu_domain_free) from [<c05a1544>] (iommu_domain_free+0x20/) [ 5.374670] r4:decd57a0 [ 5.377192] [<c05a1524>] (iommu_domain_free) from [<c011b85c>] (release_iommu_mapping+0x24/) [ 5.385922] [<c011b838>] (release_iommu_mapping) from [<c011b8cc>] (arm_iommu_release_mappi) [ 5.395943] r7:00000000 r6:decd5780 r5:00000000 r4:decd57a0 [ 5.401567] [<c011b89c>] (arm_iommu_release_mapping.part.0) from [<c011cb4c>] (arch_setup_d) [ 5.411412] r5:00000000 r4:dead1410 [ 5.414968] [<c011ca7c>] (arch_setup_dma_ops) from [<c07d2764>] (of_dma_configure+0x27c/0x3) [ 5.423521] r6:c0b58e20 r5:00000000 r4:00000000 [ 5.428109] [<c07d24e8>] (of_dma_configure) from [<c060a63c>] (platform_dma_configure+0x28/) [ 5.436838] r10:c107efdc r9:00000000 r8:c10c0008 r7:00000000 r6:c1117b34 r5:dead1410 [ 5.444612] r4:c1117b30 [ 5.447131] [<c060a614>] (platform_dma_configure) from [<c06079ec>] (really_probe+0xc4/0x42) [ 5.455602] [<c0607928>] (really_probe) from [<c0607f70>] (driver_probe_device+0x88/0x1e0) [ 5.463814] r10:00000000 r9:c060a25c r8:00000000 r7:c1008c48 r6:c107efdc r5:c107efdc [ 5.471588] r4:dead1410 [ 5.474107] [<c0607ee8>] (driver_probe_device) from [<c06081fc>] (__driver_attach+0x134/0x1) [ 5.482663] r9:c060a25c r8:00000000 r7:c1008c48 r6:c107efdc r5:dead1444 r4:dead1410 [ 5.490358] [<c06080c8>] (__driver_attach) from [<c0605510>] (bus_for_each_dev+0x84/0xc4) [ 5.498480] r7:c1008c48 r6:c06080c8 r5:c107efdc r4:00000000 [ 5.504102] [<c060548c>] (bus_for_each_dev) from [<c0607344>] (driver_attach+0x2c/0x30) [ 5.512052] r7:c10bff30 r6:c107fad8 r5:decde780 r4:c107efdc [ 5.517675] [<c0607318>] (driver_attach) from [<c0606c68>] (bus_add_driver+0x1d0/0x274) [ 5.525629] [<c0606a98>] (bus_add_driver) from [<c0608fa8>] (driver_register+0x84/0x118) [ 5.533666] r8:c060a20c r7:c0609c60 r6:c10c0230 r5:00000002 r4:c107efdc [ 5.540323] [<c0608f24>] (driver_register) from [<c060a538>] (__platform_register_drivers+0) after reverting it i can boot without crash and start x-server my repo just for reference (revert not pushed yet): https://github.com/frank-w/BPI-R2-4.14/tree/5.0-hdmi i hope i had chosen the right way to report this... regards Frank
