[PATCH 1/2] ARM: dts: imx53: Add capture-subsystem device

[Steve Longerbeam]

Add video capture_subsystem device node, and include both CSI ports.
Prepare for adding sensors by adding the parallel sensor anchor endpoints
to the CSI ports.

Signed-off-by: Steve Longerbeam <slongerb...@gmail.com>
---
 arch/arm/boot/dts/imx53.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index b3300300aabe..a78a447c4b4d 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -31,6 +31,7 @@
                i2c0 = &i2c1;
                i2c1 = &i2c2;
                i2c2 = &i2c3;
+               ipu0 = &ipu;
                mmc0 = &esdhc1;
                mmc1 = &esdhc2;
                mmc2 = &esdhc3;
@@ -71,6 +72,11 @@
                ports = <&ipu_di0>, <&ipu_di1>;
        };
 
+       capture_subsystem {
+               compatible = "fsl,imx-capture-subsystem";
+               ports = <&ipu_csi0>, <&ipu_csi1>;
+       };
+
        tzic: tz-interrupt-controller@fffc000 {
                compatible = "fsl,imx53-tzic", "fsl,tzic";
                interrupt-controller;
@@ -158,10 +164,16 @@
 
                        ipu_csi0: port@0 {
                                reg = <0>;
+
+                               ipu_csi0_from_parallel_sensor: endpoint {
+                               };
                        };
 
                        ipu_csi1: port@1 {
                                reg = <1>;
+
+                               ipu_csi1_from_parallel_sensor: endpoint {
+                               };
                        };
 
                        ipu_di0: port@2 {
-- 
2.17.1