It does, but 2.4 alpha hasn't quite worked for me (the latest matrix of
support for LINUX is below- and I haven't passed Michael Declerck's testing
yet). I'll be checking the latest alpha bits this week some time and I still
also need to finish the kernel thread work that will allow loop events to be
down OOB.
------------------------------------------------------------------------------
Linux Notes
2.0/2.1/2.3 support dropped. 2.0 support will be added back later, but
basically, it'll be 2.0/2.2/2.4 only support.
NOTE: SOME CHANGES ARE NOW REQUIRED IN A DEFAULT KERNEL BECAUSE WE NEED
NOTE: SOME EXTRA SYMBOLS EXPORTED. SEE LINUX_BUILD INSTRUCTIONS.
NOTE: AT THIS TIME YOU MUST BOOT 2.4/i386 WITH nmi_watchdog=0
NOTE: APPENDED TO THE BOOT COMMAND LINE.
NOTE: TARGET MODE IS BROKEN IN LINUX RIGHT NOW
This release has been tested agains:
Alpha 2.2.17 [1]
IA-32 2.2.17 2.4.0-test11
PowerPC 2.2.17 [2]
Sparc64 2.2.17 2.4.0-test11
There are now patches agains 2.2.17 and 2.4.0-test11 in the linux subdirectory.
Or you can build as a module in place in the linux directory. See
LINUX_BUILD_INSTRUCTIONS.
[1] 2.4.0-test11 panic'd and crashed and burned in readw for me. I think
that this is a known alpha arch problem at this time, so I'm going to wait
until 'they' fix it.
[2] I can't find a complable 2.4 for PPC at the time of test1.
------------------------------------------------------------------------------
On Tue, 19 Dec 2000, Robert Read wrote:
>
> The driver loads for me on 2.4 on Intel, but I don't have access to an
> Alpha right now. Have you tried Mathew Jacob's driver? It looks like
> it supports Alpha.
>
> http://www.feral.com/isp.html
>
> robert
>
> On Mon, Dec 18, 2000 at 04:24:38PM -0500, Peter Rival wrote:
> > Hi,
> >
> > I was just lent a QLogic ISP2200 FC adapter and have been having a
> > bear of a time trying to get it to work on my Alpha ES40 and GS80. I've
> > tried both the qlogicfc (with standard kernel) and qla2x00 (from QLogic
> > and Compaq) driver both built-in and as modules but neither of them are
> > working. Has anyone had success with later (I'm using 2.4.0-test11) 2.4
> > kernels and the QLogic FC adapter? I'm currently plugged into a Brocade
> > switch (Plaides I, I believe) which is also attached to two pair of
> > HSG80 FC RAID controllers. AFAIK, the 2200 is supposed to work with an
> > FC fabric, so this should work, right? Can anyone offer any
> > assistance? Thanks!
> >
> > - Pete
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [EMAIL PROTECTED]
> > Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
