On Thu 20 Dec 05:39 PST 2018, Rohit kumar wrote:
> This patch adds Q6V5 ADSP remoteproc node for SDM845 SoCs.
>
Thanks Rohit, nice to see these things on the list!
> Signed-off-by: Rohit kumar <rohi...@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 96
> +++++++++++++++++++++++++++++++++++-
> 1 file changed, 95 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index c0a012f..dfeb3cf 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -13,6 +13,9 @@
> #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +#include <dt-bindings/soc/qcom,apr.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
>
> / {
> interrupt-parent = <&intc>;
> @@ -1691,7 +1694,98 @@
> status = "disabled";
> };
> };
> - };
> +
> + adsp_pil: remoteproc@17300000 {
Please sort nodes by address, then name.
> + compatible = "qcom,sdm845-adsp-pil";
> +
> + reg = <0x17300000 0x410>;
> + reg-names = "qdsp6ss";
reg-names was dropped from the binding (iirc), please omit it here.
> +
> + interrupts-extended = <&intc 0 162
> IRQ_TYPE_EDGE_RISING>,
s/0/GIC_SPI/
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_LPASS_SWAY_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> + <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> + <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> +
> + clock-names = "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
> + "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> + "qdsp6ss_sleep", "qdsp6ss_core";
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> + reset-names = "pdc_sync", "cc_lpass";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + glink-edge {
So we will end up duplicating these between the PAS based and non-PAS
based remoteprocs. I don't have a better idea right now, but this
deserves some thought.
> + compatible = "qcom,glink-smem";
> + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
s/0/GIC_SPI/
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> + mboxes = <&apss_shared 8>;
> + mbox-names = "adsp_smem";
mbox-names is not a documented property, please omit it.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + apr@4 {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + reg = <APR_DOMAIN_ADSP>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + };
> +
> + q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + q6afedai: afedais {
> + compatible =
> "qcom,q6afe-dais";
> + #sound-dai-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + q6asmdai: asmdai{
> + compatible =
> "qcom,q6asm-dais";
> + iommus = <&apps_smmu
> 0x1821 0x0>;
> + #sound-dai-cells = <1>;
> + };
> + };
> +
> + q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + q6routing: routing {
> + compatible =
> "qcom,q6adm-routing";
> + #sound-dai-cells = <0>;
> + };
> + };
> + };
> + };
> + status = "disabled";
Properties must come before subnodes.
> + };
Regards,
Bjorn
