On Wed, Jan 02, 2019 at 08:45:36PM +0800, lipeng (Y) wrote: > > > On 2019/1/1 9:22, dann frazier wrote: > > On Mon, Nov 26, 2018 at 06:43:00PM +0000, Salil Mehta wrote: > > > From: Peng Li <lipeng...@huawei.com> > > > > > > Port 0/1 of HiP08 supports 10G and 25G. This patch adds a > > > change to configure NIC port speed same as that of optical > > > module(SFP/QFSP). Driver gets the optical module speed and > > > sets NIC port speed accordingly. > > Hi, > > > > I'm getting the following errors in dmesg about every 1s on a D06: > > > > [ 766.761823] hns3 0000:bd:00.0: get sfp speed failed -5 > > [ 767.785823] hns3 0000:bd:00.0: get sfp speed failed -5 > > [ 768.809820] hns3 0000:bd:00.0: get sfp speed failed -5 > > [ 769.833818] hns3 0000:bd:00.0: get sfp speed failed -5 > > > > Reverting this patch fixes the issue. > > > > -dann > Hi,dann, > > Thanks for your test and report. > > This patch needs to match new fireware verison , > And it does some work to be Compatible with older versions.
I did upgrade to the latest available firmware (20181213-b20), but the problem persisted. Maybe the necessary firmware is not yet released? > Can you show me more information？ > can you use "ethtool -i ethx" to get the fireware version , > and shows me some other message about hns3? Sure: $ sudo ethtool -i enp125s0f2 driver: hns3 version: 4.20.0+ SMP mod_unload aarch64 firmware-version: 0xb0311019 expansion-rom-version: bus-info: 0000:7d:00.2 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no -dann
