Re: [PATCH 7/9] dt-bindings: input: touchscreen: goodix: Add GT5663 compatible

[Rob Herring]

On Mon, Dec 03, 2018 at 03:45:45PM +0530, Jagan Teki wrote:
> GT5663 is capacitive touch controller with customized smart wakeup gestures,
> the existing goodix driver will work by phandle vcc-supply regulator.
> 
> So, document compatible and example node for the same.
> 
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
>  .../bindings/input/touchscreen/goodix.txt           | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt 
> b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> index 604766e347ce..1898d3dde8e1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen 
> controller
>  Required properties:
>  
>   - compatible                : Should be "goodix,gt1151"
> +                              or "goodix,gt5663"
>                                or "goodix,gt911"
>                                or "goodix,gt9110"
>                                or "goodix,gt912"
> @@ -42,3 +43,15 @@ Example:
>  
>               /* ... */
>       };
> +
> +     touchscreen@5d {
> +             compatible = "goodix,gt5663";

Just a new compatible doesn't warrant a new example.

> +             reg = <0x5d>;
> +             vcc-supply = <&reg_ldo_io0>;
> +             interrupt-parent = <&pio>;
> +             interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
> +             irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;        /* CTP-INT: PH4 
> */
> +             reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;      /* CTP-RST: PH8 
> */
> +             touchscreen-inverted-x;
> +             touchscreen-inverted-y;
> +     };
> -- 
> 2.18.0.321.gffc6fa0e3
>