The magnetometer's power supplies could be controllable on some platforms,
such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled
by a GPIO fixed regulator, need to make sure the regulators are enabled
before any communication with mag3110, this patch adds vdd/vddio regulator
operation support.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
ChangeLog since V4:
- using devm_regulator_get() instead of devm_regulator_get_optional()
since the regulator is
there always, if dtb does NOT specify one, regulator framework will
assign dummy regulator for it
---
drivers/iio/magnetometer/mag3110.c | 92 ++++++++++++++++++++++++++++++++++----
1 file changed, 84 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/magnetometer/mag3110.c
b/drivers/iio/magnetometer/mag3110.c
index f063355..32660ce 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -20,6 +20,7 @@
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#define MAG3110_STATUS 0x00
#define MAG3110_OUT_X 0x01 /* MSB first */
@@ -56,6 +57,8 @@ struct mag3110_data {
struct mutex lock;
u8 ctrl_reg1;
int sleep_val;
+ struct regulator *vdd_reg;
+ struct regulator *vddio_reg;
};
static int mag3110_request(struct mag3110_data *data)
@@ -469,17 +472,48 @@ static int mag3110_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
int ret;
- ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
- if (ret < 0)
- return ret;
- if (ret != MAG3110_DEVICE_ID)
- return -ENODEV;
-
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
+
+ data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(data->vdd_reg)) {
+ ret = PTR_ERR(data->vdd_reg);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&client->dev, "failed to get VDD regulator!\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDD regulator!\n");
+ return ret;
+ }
+
+ data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+ if (IS_ERR(data->vddio_reg)) {
+ ret = PTR_ERR(data->vddio_reg);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&client->dev, "failed to get VDDIO
regulator!\n");
+ goto disable_regulator_vdd;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+ goto disable_regulator_vdd;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+ if (ret < 0)
+ goto disable_regulators;
+ if (ret != MAG3110_DEVICE_ID) {
+ ret = -ENODEV;
+ goto disable_regulators;
+ }
+
data->client = client;
mutex_init(&data->lock);
@@ -499,7 +533,7 @@ static int mag3110_probe(struct i2c_client *client,
ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1);
if (ret < 0)
- return ret;
+ goto disable_regulators;
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
MAG3110_CTRL_AUTO_MRST_EN);
@@ -520,16 +554,24 @@ static int mag3110_probe(struct i2c_client *client,
iio_triggered_buffer_cleanup(indio_dev);
standby_on_error:
mag3110_standby(iio_priv(indio_dev));
+disable_regulators:
+ regulator_disable(data->vddio_reg);
+disable_regulator_vdd:
+ regulator_disable(data->vdd_reg);
+
return ret;
}
static int mag3110_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct mag3110_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
mag3110_standby(iio_priv(indio_dev));
+ regulator_disable(data->vddio_reg);
+ regulator_disable(data->vdd_reg);
return 0;
}
@@ -537,14 +579,48 @@ static int mag3110_remove(struct i2c_client *client)
#ifdef CONFIG_PM_SLEEP
static int mag3110_suspend(struct device *dev)
{
- return mag3110_standby(iio_priv(i2c_get_clientdata(
+ struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev)));
+ int ret;
+
+ ret = mag3110_standby(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+
+ return 0;
}
static int mag3110_resume(struct device *dev)
{
struct mag3110_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
+ int ret;
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
data->ctrl_reg1);
--
2.7.4
