The MediaTek BTIF controller doesn't need to set termios so add
a new capability 'UART_CAP_NMOD' for the unsupported case.
Signed-off-by: Sean Wang <sean.w...@mediatek.com>
Signed-off-by: Ryder Lee <ryder....@mediatek.com>
---
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_port.c | 7 ++++++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ebfb0bd..2b9ba39 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -80,6 +80,7 @@ struct serial8250_config {
#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks:
* STOP PARITY EPAR SPAR WLEN5 WLEN6
*/
+#define UART_CAP_NMOD (1 << 18) /* UART doesn't do termios */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_port.c
b/drivers/tty/serial/8250/8250_port.c
index c39482b..e4a69a0 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -297,7 +297,7 @@
.tx_loadsz = 16,
.fcr = UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_NMOD,
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
@@ -2663,6 +2663,11 @@ static unsigned int serial8250_get_baud_rate(struct
uart_port *port,
unsigned long flags;
unsigned int baud, quot, frac = 0;
+ if (up->capabilities & UART_CAP_NMOD) {
+ termios->c_cflag = 0;
+ return;
+ }
+
if (up->capabilities & UART_CAP_MINI) {
termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
if ((termios->c_cflag & CSIZE) == CS5 ||
--
1.9.1
