Hi Peter,
In _my_ case I compiled the EMU10K straight into the kernel.
dmesg shows it's found. The funny thing is that a second machine with an
es1371 board alos fails with 2.2.18.
2.2.17 is ok. Taking that .config and 'make oldconfig' produces a kernel
that doesnt allow the emu10k to work. (as for the es1371).
Kees
On Sat, 16 Dec 2000, Peter Samuelson wrote:
>
> [Dima Brodsky]
> > cat x > /dev/dsp
>
> > bash: /dev/dsp: No such device
> >
> > But an ls -l shows:
> >
> > crw-rw-rw- 1 root sys 14, 3 Dec 15 21:25 dsp
> > crw-rw-rw- 1 root sys 14, 19 Dec 15 21:25 dsp1
>
> 'ls -l' is useless, here. Sure the device files exist, but bash is
> telling you that, kernel-side, they are not connected to anything.
>
> - Do you have emu10k1 compiled in, or as a module?
> - Does your SBLive appear to have been detected? (Check 'dmesg')
> - If emu10k1 is a module, is the module loaded? Does it seem to detect
> your SBLive when loaded? (Again check 'dmesg')
>
> Peter
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
