Felipe Contreras wrote: > Hi, Hi ,
> > Since I updated to 2.6.22 everything has been slower and I think this > is the reason: > > ata_piix 0000:00:1f.2: version 2.11 > ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 > ata_piix 0000:00:1f.2: 0x1F0 IDE port busy > ata_piix 0000:00:1f.2: 0x170 IDE port busy > ata_piix 0000:00:1f.2: no available legacy port > > I tried to apply the patch d583bc18812f8da52bf25eef9cd111e5fd46a6ab, > but I get a similar error: > > ata_piix 0000:00:1f.2: version 2.11 > ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 > PCI: Unable to reserve I/O region #1:[EMAIL PROTECTED] for device 0000:00:1f.2 > ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) > PCI: Unable to reserve I/O region #3:[EMAIL PROTECTED] for device 0000:00:1f.2 > ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) > ata_piix 0000:00:1f.2: no available native port > > I think I'm not the only one with that problem: > http://www.dellcommunity.com/supportforums/board/message?board.id=sw_linux&thread.id=10825 > > Any hints? > Guessing you are using and SATA/PATA controller ? Combined mode got removed in 2.6.22 and depending on your config things will break. As example CONFIG_IDE=y BLK_DEV_PIIX=y , ATA=y , ATA_PIIX=Y worked in <2.6.22 but won't on .22. If you want to use libata try to boot with ideX=noprobe ideY=noprobe Gabriel - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
