Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.

Signed-off-by: Aaron Durbin <[EMAIL PROTECTED]>
---

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d4336f1..c9906a5 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_X86)             += blacklist.o
 #
 # ACPI Core Subsystem (Interpreter)
 #
-obj-y                          += osl.o utils.o \
+obj-y                          += osl.o utils.o reboot.o \
                                   dispatcher/ events/ executer/ hardware/ \
                                   namespace/ parser/ resources/ tables/ \
                                   utilities/
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
new file mode 100644
index 0000000..4bb4d3e
--- /dev/null
+++ b/drivers/acpi/reboot.c
@@ -0,0 +1,45 @@
+
+#include <linux/pci.h>
+#include <acpi/acpi.h>
+
+void acpi_reboot(void)
+{
+       struct acpi_generic_address *rr;
+       struct pci_bus *bus0;
+       u8 reset_value;
+       unsigned int devfn;
+
+       rr = &acpi_gbl_FADT.reset_register;
+
+       /* Is the reset register supported? */
+       if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+           rr->bit_width != 8 || rr->bit_offset != 0)
+               return;
+
+       reset_value = acpi_gbl_FADT.reset_value;
+
+       /* The reset register can only exist in I/O, Memory or PCI config space
+        * on a device on bus 0. */
+       switch (rr->space_id) {
+               case ACPI_ADR_SPACE_PCI_CONFIG:
+                       /* The reset register can only live on bus 0. */
+                       bus0 = pci_find_bus(0, 0);
+                       if (!bus0)
+                               return;
+                       /* Form PCI device/function pair. */
+                       devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
+                                         (rr->address >> 16) & 0xffff);
+                       printk(KERN_DEBUG "Resetting with ACPI PCI RESET_REG.");
+                       /* Write the value that resets us. */
+                       pci_bus_write_config_byte(bus0, devfn,
+                                       (rr->address & 0xffff), reset_value);
+                       break;
+
+               case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+               case ACPI_ADR_SPACE_SYSTEM_IO:
+                       printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.");
+                       acpi_hw_low_level_write(8, reset_value, rr);
+                       break;
+       }
+}
+
diff --git a/include/acpi/reboot.h b/include/acpi/reboot.h
new file mode 100644
index 0000000..1d8da79
--- /dev/null
+++ b/include/acpi/reboot.h
@@ -0,0 +1,10 @@
+#ifndef __ACPI_REBOOT_H
+#define __ACPI_REBOOT_H
+
+#ifdef CONFIG_ACPI
+extern void acpi_reboot(void);
+#else
+#define acpi_reboot()
+#endif
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to