Move #clock-cells into the child node for instances of the qcom-qmp-phy
nodes, and set it to zero, in accordance with the proper bindings. PHYs
that don't provide clocks don't have #clock-cells, and so are left alone.
Signed-off-by: Evan Green <evgr...@chromium.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 61a7cee153eae..4582db5e86350 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1178,7 +1178,6 @@
<0x88e8000 0x10>;
reg-names = "reg-base", "dp_com";
status = "disabled";
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1200,6 +1199,7 @@
<0x88e9600 0x128>,
<0x88e9800 0x200>,
<0x88e9a00 0x100>;
+ #clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
@@ -1211,7 +1211,6 @@
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
reg = <0x88eb000 0x18c>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1231,6 +1230,7 @@
<0x88eb400 0x1fc>,
<0x88eb800 0x218>,
<0x88e9600 0x70>;
+ #clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
--
2.18.1
