Add a platform clocksource by adapting the existing arch_gettimeoffset
implementation.

Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
---
 arch/m68k/include/asm/mvme147hw.h |  1 -
 arch/m68k/mvme147/config.c        | 43 +++++++++++++++++++++++--------
 2 files changed, 32 insertions(+), 12 deletions(-)

diff --git a/arch/m68k/include/asm/mvme147hw.h 
b/arch/m68k/include/asm/mvme147hw.h
index 9c7ff67c5ffd..7c3dd513128e 100644
--- a/arch/m68k/include/asm/mvme147hw.h
+++ b/arch/m68k/include/asm/mvme147hw.h
@@ -66,7 +66,6 @@ struct pcc_regs {
 #define PCC_INT_ENAB           0x08
 
 #define PCC_TIMER_INT_CLR      0x80
-#define PCC_TIMER_PRELOAD      63936l
 
 #define PCC_LEVEL_ABORT                0x07
 #define PCC_LEVEL_SERIAL       0x04
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index ff7141cf27d1..e7bd40e510d9 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
+#include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
@@ -44,12 +45,6 @@ extern void mvme147_reset (void);
 
 static int bcd2int (unsigned char b);
 
-/* Save tick handler routine pointer, will point to xtime_update() in
- * kernel/time/timekeeping.c, called via mvme147_process_int() */
-
-irq_handler_t tick_handler;
-
-
 int __init mvme147_parse_bootinfo(const struct bi_record *bi)
 {
        uint16_t tag = be16_to_cpu(bi->tag);
@@ -97,34 +92,59 @@ void __init config_mvme147(void)
                vme_brdtype = VME_TYPE_MVME147;
 }
 
+static u64 mvme147_read_clk(struct clocksource *cs);
+
+static struct clocksource mvme147_clk = {
+       .name   = "pcc",
+       .rating = 250,
+       .read   = mvme147_read_clk,
+       .mask   = CLOCKSOURCE_MASK(32),
+       .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u32 clk_total;
+
+#define PCC_TIMER_CLOCK_FREQ 160000
+#define PCC_TIMER_CYCLES     (PCC_TIMER_CLOCK_FREQ / HZ)
+#define PCC_TIMER_PRELOAD    (0x10000 - PCC_TIMER_CYCLES)
 
 /* Using pcc tick timer 1 */
 
 static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
 {
+       irq_handler_t tick_handler = dev_id;
+       unsigned long flags;
+
        m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
        m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
+
+       local_irq_save(flags);
+       clk_total += PCC_TIMER_CYCLES;
+       local_irq_restore(flags);
+
        return tick_handler(irq, dev_id);
 }
 
 
 void mvme147_sched_init (irq_handler_t timer_routine)
 {
-       tick_handler = timer_routine;
-       if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
+       if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
+                       "timer 1", timer_routine))
                pr_err("Couldn't register timer interrupt\n");
 
        /* Init the clock with a value */
-       /* our clock goes off every 6.25us */
+       /* The clock counter increments until 0xFFFF then reloads */
        m147_pcc->t1_preload = PCC_TIMER_PRELOAD;
        m147_pcc->t1_cntrl = 0x0;       /* clear timer */
        m147_pcc->t1_cntrl = 0x3;       /* start timer */
        m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;  /* clear pending ints */
        m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
+
+       clocksource_register_hz(&mvme147_clk, PCC_TIMER_CLOCK_FREQ);
 }
 
 /* XXX There are race hazards in this code XXX */
-u32 mvme147_gettimeoffset(void)
+static u64 mvme147_read_clk(struct clocksource *cs)
 {
        unsigned long flags;
        volatile unsigned short *cp = (volatile unsigned short *)0xfffe1012;
@@ -139,7 +159,8 @@ u32 mvme147_gettimeoffset(void)
        local_irq_restore(flags);
 
        n -= PCC_TIMER_PRELOAD;
-       return ((unsigned long)n * 25 / 4) * 1000;
+
+       return clk_total + n;
 }
 
 static int bcd2int (unsigned char b)
-- 
2.18.1

Reply via email to