On Thu, Oct 18, 2018 at 09:45:04AM +0200, Frieder Schrempf wrote:
> Some SOCs in the i.MX6 family have a USB host controller that is
> only capable of the HSIC interface and has no on-board PHY.
>
> To be able to use these controllers, we need to add "usb-nop-xceiv"
> dummy PHYs.
>
> Signed-off-by: Frieder Schrempf <frieder.schre...@kontron.de>
@Peter, looks good to you?
Shawn
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 14 ++++++++++++++
> arch/arm/boot/dts/imx6sl.dtsi | 7 +++++++
> arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++
> 3 files changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 61d2d26..d3404d1 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -139,6 +139,16 @@
> interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + usbphynop1: usbphynop1 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + };
> +
> + usbphynop2: usbphynop2 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + };
> +
> soc {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -981,6 +991,8 @@
> reg = <0x02184400 0x200>;
> interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX6QDL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphynop1>;
> + phy_type = "hsic";
> fsl,usbmisc = <&usbmisc 2>;
> dr_mode = "host";
> ahb-burst-config = <0x0>;
> @@ -994,6 +1006,8 @@
> reg = <0x02184600 0x200>;
> interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX6QDL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphynop2>;
> + phy_type = "hsic";
> fsl,usbmisc = <&usbmisc 3>;
> dr_mode = "host";
> ahb-burst-config = <0x0>;
> diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> index 7a4f5da..81edcdc 100644
> --- a/arch/arm/boot/dts/imx6sl.dtsi
> +++ b/arch/arm/boot/dts/imx6sl.dtsi
> @@ -110,6 +110,11 @@
> interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + usbphynop1: usbphynop1 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + };
> +
> soc {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -815,6 +820,8 @@
> reg = <0x02184400 0x200>;
> interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX6SL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphynop1>;
> + phy_type = "hsic";
> fsl,usbmisc = <&usbmisc 2>;
> dr_mode = "host";
> ahb-burst-config = <0x0>;
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index 844caa3..07ed417 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -159,6 +159,11 @@
> interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + usbphynop1: usbphynop1 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + };
> +
> soc {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -877,6 +882,7 @@
> reg = <0x02184400 0x200>;
> interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX6SX_CLK_USBOH3>;
> + fsl,usbphy = <&usbphynop1>;
> fsl,usbmisc = <&usbmisc 2>;
> phy_type = "hsic";
> fsl,anatop = <&anatop>;
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
