[PATCH v2 3/7] arm64: dts: hisilicon: hikey: Standardize LED labels and triggers

[Manivannan Sadhasivam]

For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for HiKey, which is one of the 96Boards
CE platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts 
b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index f4964bee6a1a..d2bb5912dee7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -340,42 +340,43 @@
 
        leds {
                compatible = "gpio-leds";
+
                user_led4 {
-                       label = "user_led4";
+                       label = "green:user1";
                        gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
                        linux,default-trigger = "heartbeat";
                };
 
                user_led3 {
-                       label = "user_led3";
+                       label = "green:user2";
                        gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
                        linux,default-trigger = "mmc0";
                };
 
                user_led2 {
-                       label = "user_led2";
+                       label = "green:user3";
                        gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
                        linux,default-trigger = "mmc1";
                };
 
                user_led1 {
-                       label = "user_led1";
+                       label = "green:user4";
                        gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
                        panic-indicator;
-                       linux,default-trigger = "cpu0";
+                       linux,default-trigger = "none";
                };
 
                wlan_active_led {
-                       label = "wifi_active";
+                       label = "yellow:wlan";
                        gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
                        linux,default-trigger = "phy0tx";
                        default-state = "off";
                };
 
                bt_active_led {
-                       label = "bt_active";
+                       label = "blue:bt";
                        gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
-                       linux,default-trigger = "hci0rx";
+                       linux,default-trigger = "hci0-power";
                        default-state = "off";
                };
        };
-- 
2.17.1