On 2018/10/19 1:13, Stephen Boyd wrote:
> Quoting Jianxin Pan (2018-10-17 22:07:25)
>> diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
>> index 305ee30..f96314d 100644
>> --- a/drivers/clk/meson/clk-regmap.c
>> +++ b/drivers/clk/meson/clk-regmap.c
>> @@ -113,8 +113,25 @@ static int clk_regmap_div_set_rate(struct clk_hw *hw,
>> unsigned long rate,
>> clk_div_mask(div->width) << div->shift,
>> val);
>> };
>>
>> -/* Would prefer clk_regmap_div_ro_ops but clashes with qcom */
>> +static void clk_regmap_div_init(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
>> + unsigned int val;
>> + int ret;
>> +
>> + ret = regmap_read(clk->map, div->offset, &val);
>> + if (ret)
>> + return;
>>
>> + val &= (clk_div_mask(div->width) << div->shift);
>> + if (!val)
>> + regmap_update_bits(clk->map, div->offset,
>> + clk_div_mask(div->width) << div->shift,
>> + clk_div_mask(div->width));
>> +}
>> +
>> +/* Would prefer clk_regmap_div_ro_ops but clashes with qcom */
>
> We should add a patch to rename the symbol for qcom, i.e.
> qcom_clk_regmap_div_ro_ops, and then any symbols in this directory
> should be meson_clk_regmap_div_ro_ops.
"/* Would prefer clk_regmap_div_ro_ops but clashes with qcom */"
This comment is not introduced in this patch.
I followed the naming style in this file and add
clk_regmap_divider_with_init_ops.
@Jerome， What's your suggestion about this？
>
> Or we should just give up and squash the regmap implementations together
> into a new clk_regmap set of ops.
>
>> const struct clk_ops clk_regmap_divider_ops = {
>> .recalc_rate = clk_regmap_div_recalc_rate,
>> .round_rate = clk_regmap_div_round_rate,
>> diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
>> new file mode 100644
>> index 0000000..5555e3f
>> --- /dev/null
>> +++ b/drivers/clk/meson/mmc-clkc.c
>> @@ -0,0 +1,296 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Amlogic Meson MMC Sub Clock Controller Driver
>> + *
>> + * Copyright (c) 2017 Baylibre SAS.
>> + * Author: Jerome Brunet <jbru...@baylibre.com>
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yixun Lan <yixun....@amlogic.com>
>> + */
>> +
>> +#include <linux/clk.h>
>
> clk-provider.h instead of clk.h?
OK.
>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +#include <dt-bindings/clock/amlogic,mmc-clkc.h>
>> +
>> +
> [...]
>> +
>> +static struct clk_regmap *
>> +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map,
>> + char *suffix, const char *parent,
>> + unsigned long flags,
>> + const struct clk_ops *ops, void *data)
>> +{
>> + struct clk_init_data init;
>> + struct clk_regmap *clk;
>> +
>> + init.ops = ops;
>> + init.flags = flags;
>> + init.parent_names = (const char* const []){ parent, };
>
> Can't we just assign &parent here?
OK. I will fix it in the next version.
>
>> + init.num_parents = 1;
>> +
>> + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
>> + if (IS_ERR(clk))
>> + dev_err(dev, "Core %s clock registration failed\n", suffix);
>> +
>> + return clk;
>> +}
>> +
>> +static int mmc_clkc_probe(struct platform_device *pdev)
>> +{
>> + struct clk_hw_onecell_data *onecell_data;
>> + struct device *dev = &pdev->dev;
>> + struct mmc_clkc_data *data;
>> + struct regmap *map;
>> + struct clk_regmap *mux, *div, *core, *rx, *tx;
>> +
>> + data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
>
> Nitpick: Drop the cast.
OK. I will drop it.
Thanks for the review.
>
>> + if (!data)
>> + return -ENODEV;
>> +
>> + map = syscon_node_to_regmap(dev->of_node);
>
> .
>
