4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marco Felsch <m.fel...@pengutronix.de>
commit f259f896f2348f0302f6f88d4382378cf9d23a7e upstream.
Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.
'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.
Cc: sta...@vger.kernel.org
Cc: Jan Kundrát <jan.kund...@cesnet.cz>
Cc: Dmitry Mastykin <masti...@gmail.com>
Cc: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
Fixes: 82039d244f87 ("pinctrl: mcp23s08: add pinconf support")
Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
Tested-by: Phil Reid <pr...@electromag.com.au>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/pinctrl/pinctrl-mcp23s08.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -636,6 +636,14 @@ static int mcp23s08_irq_setup(struct mcp
return err;
}
+ return 0;
+}
+
+static int mcp23s08_irqchip_setup(struct mcp23s08 *mcp)
+{
+ struct gpio_chip *chip = &mcp->chip;
+ int err;
+
err = gpiochip_irqchip_add_nested(chip,
&mcp23s08_irq_chip,
0,
@@ -912,7 +920,7 @@ static int mcp23s08_probe_one(struct mcp
}
if (mcp->irq && mcp->irq_controller) {
- ret = mcp23s08_irq_setup(mcp);
+ ret = mcp23s08_irqchip_setup(mcp);
if (ret)
goto fail;
}
@@ -944,6 +952,9 @@ static int mcp23s08_probe_one(struct mcp
goto fail;
}
+ if (mcp->irq)
+ ret = mcp23s08_irq_setup(mcp);
+
fail:
if (ret < 0)
dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
