From: Nigel Cunningham <[EMAIL PROTECTED]>
Add a feature allowing the user to make the system beep during a resume from
suspend to RAM, on x86_64 and i386.
This is useful for the users with broken resume from RAM, so that they can
verify if the control reaches the kernel after a wake-up event.
Signed-off-by: Rafael J. Wysocki <[EMAIL PROTECTED]>
---
arch/i386/kernel/acpi/wakeup.S | 27 +++++++++++++++++++++++++++
arch/x86_64/kernel/acpi/wakeup.S | 25 +++++++++++++++++++++++++
include/linux/acpi.h | 1 +
kernel/power/main.c | 23 +++++++++++++++++++++++
4 files changed, 76 insertions(+)
Index: linux-2.6.22-rc6-mm1/arch/i386/kernel/acpi/wakeup.S
===================================================================
--- linux-2.6.22-rc6-mm1.orig/arch/i386/kernel/acpi/wakeup.S
+++ linux-2.6.22-rc6-mm1/arch/i386/kernel/acpi/wakeup.S
@@ -28,6 +28,21 @@
movb $15, %al; \
outb %al, $66;
+#define BEEP \
+ inb $97, %al; \
+ outb %al, $0x80; \
+ movb $3, %al; \
+ outb %al, $97; \
+ outb %al, $0x80; \
+ movb $-74, %al; \
+ outb %al, $67; \
+ outb %al, $0x80; \
+ movb $-119, %al; \
+ outb %al, $66; \
+ outb %al, $0x80; \
+ movb $15, %al; \
+ outb %al, $66;
+
ALIGN
.align 4096
ENTRY(wakeup_start)
@@ -49,6 +64,11 @@ wakeup_code:
movw %cs, %ax
movw %ax, %ds # Make ds:0
point to wakeup_start
movw %ax, %ss
+
+ testl $1, beep_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
mov $(wakeup_stack - wakeup_code), %sp # Private stack
is needed for ASUS board
movw $0x0e00 + 'S', %fs:(0x12)
@@ -106,6 +126,10 @@ wakeup_code:
cmpl $0x12345678, %eax
jne bogus_real_magic
+ testl $2, beep_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
ljmpl $__KERNEL_CS,$wakeup_pmode_return
real_save_gdt: .word 0
@@ -116,6 +140,7 @@ real_save_cr4: .long 0
real_magic: .long 0
video_mode: .long 0
video_flags: .long 0
+beep_flags: .long 0
real_efer_save_restore: .long 0
real_save_efer_edx: .long 0
real_save_efer_eax: .long 0
@@ -280,6 +305,8 @@ ENTRY(acpi_copy_wakeup_routine)
movl %edx, video_mode - wakeup_start (%eax)
movl acpi_video_flags, %edx
movl %edx, video_flags - wakeup_start (%eax)
+ movl s2ram_beep, %edx
+ movl %edx, beep_flags - wakeup_start (%eax)
movl $0x12345678, real_magic - wakeup_start (%eax)
movl $0x12345678, saved_magic
popl %ebx
Index: linux-2.6.22-rc6-mm1/arch/x86_64/kernel/acpi/wakeup.S
===================================================================
--- linux-2.6.22-rc6-mm1.orig/arch/x86_64/kernel/acpi/wakeup.S
+++ linux-2.6.22-rc6-mm1/arch/x86_64/kernel/acpi/wakeup.S
@@ -16,6 +16,21 @@
# cs = 0x1234, eip = 0x05
#
+#define BEEP \
+ inb $97, %al; \
+ outb %al, $0x80; \
+ movb $3, %al; \
+ outb %al, $97; \
+ outb %al, $0x80; \
+ movb $-74, %al; \
+ outb %al, $67; \
+ outb %al, $0x80; \
+ movb $-119, %al; \
+ outb %al, $66; \
+ outb %al, $0x80; \
+ movb $15, %al; \
+ outb %al, $66;
+
ALIGN
.align 16
@@ -33,6 +48,13 @@ wakeup_code:
movw %cs, %ax
movw %ax, %ds # Make ds:0 point to wakeup_start
movw %ax, %ss
+
+ # Data segment must be set up before we can see whether to beep.
+ testl $1, beep_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
+
# Private stack is needed for ASUS board
mov $(wakeup_stack - wakeup_code), %sp
@@ -229,6 +251,7 @@ gdt_48a:
.long gdta - wakeup_code # gdt base (relocated in later)
real_magic: .quad 0
+beep_flags: .quad 0
video_mode: .quad 0
video_flags: .quad 0
@@ -344,6 +367,8 @@ ENTRY(acpi_copy_wakeup_routine)
pushq %rax
pushq %rdx
+ movl s2ram_beep, %edx
+ movl %edx, beep_flags - wakeup_start (,%rdi)
movl saved_video_mode, %edx
movl %edx, video_mode - wakeup_start (,%rdi)
movl acpi_video_flags, %edx
Index: linux-2.6.22-rc6-mm1/include/linux/acpi.h
===================================================================
--- linux-2.6.22-rc6-mm1.orig/include/linux/acpi.h
+++ linux-2.6.22-rc6-mm1/include/linux/acpi.h
@@ -121,6 +121,7 @@ extern int pci_mmcfg_config_num;
extern int sbf_port;
extern unsigned long acpi_video_flags;
+extern unsigned long s2ram_beep;
#else /* !CONFIG_ACPI */
Index: linux-2.6.22-rc6-mm1/kernel/power/main.c
===================================================================
--- linux-2.6.22-rc6-mm1.orig/kernel/power/main.c
+++ linux-2.6.22-rc6-mm1/kernel/power/main.c
@@ -332,6 +332,27 @@ static ssize_t state_store(struct kset *
power_attr(state);
+unsigned long s2ram_beep = 0;
+
+static ssize_t s2ram_beep_show(struct kset *kset, char *buf)
+{
+ return sprintf(buf, "%d\n", s2ram_beep);
+}
+
+static ssize_t
+s2ram_beep_store(struct kset *kset, const char *buf, size_t n)
+{
+ int val;
+
+ if (sscanf(buf, "%d", &val) > 0) {
+ s2ram_beep = val;
+ return n;
+ }
+ return -EINVAL;
+}
+
+power_attr(s2ram_beep);
+
#ifdef CONFIG_PM_TRACE
int pm_trace_enabled;
@@ -357,11 +378,13 @@ power_attr(pm_trace);
static struct attribute * g[] = {
&state_attr.attr,
&pm_trace_attr.attr,
+ &s2ram_beep_attr.attr,
NULL,
};
#else
static struct attribute * g[] = {
&state_attr.attr,
+ &s2ram_beep_attr.attr,
NULL,
};
#endif /* CONFIG_PM_TRACE */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
