Greg,
please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
timers-urgent-for-linus
Three small fixes for clocksource drivers:
- Proper error handling in the Atmel PIT driver
- Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again
- Fix the next event function for Facebook Backpack-CMM BMC chips so
usleep(100) doesnt sleep several milliseconds
Thanks,
tglx
------------------>
Alexandre Belloni (1):
clocksource/drivers/timer-atmel-pit: Properly handle error cases
Keerthy (1):
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for
non-am43 SoCs
Tao Ren (1):
clocksource/drivers/fttmr010: Fix set_next_event handler
drivers/clocksource/timer-atmel-pit.c | 20 ++++++++++++++------
drivers/clocksource/timer-fttmr010.c | 18 +++++++++++-------
drivers/clocksource/timer-ti-32k.c | 3 +++
3 files changed, 28 insertions(+), 13 deletions(-)
diff --git a/drivers/clocksource/timer-atmel-pit.c
b/drivers/clocksource/timer-atmel-pit.c
index ec8a4376f74f..2fab18fae4fc 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -180,26 +180,29 @@ static int __init at91sam926x_pit_dt_init(struct
device_node *node)
data->base = of_iomap(node, 0);
if (!data->base) {
pr_err("Could not map PIT address\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto exit;
}
data->mck = of_clk_get(node, 0);
if (IS_ERR(data->mck)) {
pr_err("Unable to get mck clk\n");
- return PTR_ERR(data->mck);
+ ret = PTR_ERR(data->mck);
+ goto exit;
}
ret = clk_prepare_enable(data->mck);
if (ret) {
pr_err("Unable to enable mck\n");
- return ret;
+ goto exit;
}
/* Get the interrupts property */
data->irq = irq_of_parse_and_map(node, 0);
if (!data->irq) {
pr_err("Unable to get IRQ from DT\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}
/*
@@ -227,7 +230,7 @@ static int __init at91sam926x_pit_dt_init(struct
device_node *node)
ret = clocksource_register_hz(&data->clksrc, pit_rate);
if (ret) {
pr_err("Failed to register clocksource\n");
- return ret;
+ goto exit;
}
/* Set up irq handler */
@@ -236,7 +239,8 @@ static int __init at91sam926x_pit_dt_init(struct
device_node *node)
"at91_tick", data);
if (ret) {
pr_err("Unable to setup IRQ\n");
- return ret;
+ clocksource_unregister(&data->clksrc);
+ goto exit;
}
/* Set up and register clockevents */
@@ -254,6 +258,10 @@ static int __init at91sam926x_pit_dt_init(struct
device_node *node)
clockevents_register_device(&data->clkevt);
return 0;
+
+exit:
+ kfree(data);
+ return ret;
}
TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
at91sam926x_pit_dt_init);
diff --git a/drivers/clocksource/timer-fttmr010.c
b/drivers/clocksource/timer-fttmr010.c
index c020038ebfab..cf93f6419b51 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -130,13 +130,17 @@ static int fttmr010_timer_set_next_event(unsigned long
cycles,
cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);
- /* Setup the match register forward/backward in time */
- cr = readl(fttmr010->base + TIMER1_COUNT);
- if (fttmr010->count_down)
- cr -= cycles;
- else
- cr += cycles;
- writel(cr, fttmr010->base + TIMER1_MATCH1);
+ if (fttmr010->count_down) {
+ /*
+ * ASPEED Timer Controller will load TIMER1_LOAD register
+ * into TIMER1_COUNT register when the timer is re-enabled.
+ */
+ writel(cycles, fttmr010->base + TIMER1_LOAD);
+ } else {
+ /* Setup the match register forward in time */
+ cr = readl(fttmr010->base + TIMER1_COUNT);
+ writel(cr + cycles, fttmr010->base + TIMER1_MATCH1);
+ }
/* Start */
cr = readl(fttmr010->base + TIMER_CR);
diff --git a/drivers/clocksource/timer-ti-32k.c
b/drivers/clocksource/timer-ti-32k.c
index 29e2e1a78a43..6949a9113dbb 100644
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -97,6 +97,9 @@ static int __init ti_32k_timer_init(struct device_node *np)
return -ENXIO;
}
+ if (!of_machine_is_compatible("ti,am43"))
+ ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
ti_32k_timer.counter = ti_32k_timer.base;
/*
