[1.] One line summary of the problem:
USB (MS Intellimouse specifically) does not work with SMP kernel 2.2.18.
[2.] Full description of the problem/report:
When trying to install a Microsoft Intellimouse Explorer (USB)
to a SMP kernel, I get the following error multiple times:
usb.c: USB device not accepting new address (error=-110)
If USB is compiled in, then it happens several times during the
boot sequence.
Everything works fine on a single-processor kernel. I have tried
installing all of USB as modules, and I have tried compiling it
into the kernel with no change.
System is a MSI 694D-Pro AR motherboard (Via 694X chipset)
Dual 500 Mhz Celeron processors, 500 Mhz (Not overclocked)
Microsoft Intellimouse explorer.
I suspect that it is an issue where locking is required,
but none currently exists, either in mousedev, usb, or
uhci. (Great logic--those are the main modules that should
be in use.) I suspect that the problem can be duplicated
on my system under Linux 2.4.0-test11, but, alas, I cannot
get linux 2.4 to boot right now.
I don't see the hid module in the status output like I do on
the uni-processor kernel. Maybe those structures need locks.
[3.] Keywords (i.e., modules, networking, kernel):
USB, mousedev, hid, input, mouse, intellimouse, linux-2.2.18
[4.] Kernel version (from /proc/version):
Linux 2.2.18
[5.] [6.] N/A
I can reproduce it with the current kernel every time.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Slackware 7.1 + Linux 2.2.18
[7.2.] Processor information (from /proc/cpuinfo):
Below.
[7.3.] Module information (from /proc/modules):
Below
[7.4.] SCSI information (from /proc/scsi/scsi)
Not Applicable.
[7.5.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
#/proc/version
Linux version 2.2.18 (root@darkstar) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Mon Dec 11 23:32:12 GMT 2000
#/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 501.148
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 999.42
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 501.148
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 999.42
#/proc/modules
mousedev 3916 0 (unused)
input 2780 0 [mousedev]
uhci 19100 0 (unused)
usbcore 49256 1 [uhci]
#/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies Unknown device (rev 196).
Vendor id=1106. Device id=691.
Medium devsel. Master Capable. No bursts.
Prefetchable 32 bit memory at 0xd0000000 [0xd0000008].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies VT 82C598 Apollo MVP3 AGP (rev 0).
Medium devsel. Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies Unknown device (rev 34).
Vendor id=1106. Device id=686.
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 16).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=32.
I/O at 0xc000 [0xc001].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 16).
Medium devsel. IRQ 19. Master Capable. Latency=32.
I/O at 0xc400 [0xc401].
Bus 0, device 7, function 3:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 16).
Medium devsel. IRQ 19. Master Capable. Latency=32.
I/O at 0xc800 [0xc801].
Bus 0, device 7, function 4:
Host bridge: VIA Technologies Unknown device (rev 48).
Vendor id=1106. Device id=3057.
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 5:
Multimedia audio controller: VIA Technologies Unknown device (rev 32).
Vendor id=1106. Device id=3058.
Medium devsel. IRQ 18.
I/O at 0xcc00 [0xcc01].
I/O at 0xd000 [0xd001].
I/O at 0xd400 [0xd401].
Bus 0, device 12, function 0:
RAID storage controller: Promise Technology Unknown device (rev 2).
Vendor id=105a. Device id=d30.
Medium devsel. IRQ 18. Master Capable. Latency=32.
I/O at 0xd800 [0xd801].
I/O at 0xdc00 [0xdc01].
I/O at 0xe000 [0xe001].
I/O at 0xe400 [0xe401].
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xd9000000 [0xd9000000].
Bus 0, device 14, function 0:
Communication controller: Unknown vendor Unknown device (rev 8).
Vendor id=14f1. Device id=1035.
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=32.
Non-prefetchable 32 bit memory at 0xd9020000 [0xd9020000].
I/O at 0xec00 [0xec01].
Bus 0, device 15, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 3).
Vendor id=1073. Device id=d.
Medium devsel. IRQ 17. Master Capable. Latency=32. Min Gnt=5.Max
Lat=25.
Non-prefetchable 32 bit memory at 0xd9030000 [0xd9030000].
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 17).
Vendor id=10de. Device id=28.
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xd6000000 [0xd6000000].
Prefetchable 32 bit memory at 0xd4000000 [0xd4000008].
#/proc/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
