Add the dedicated TI LM3632 LED driver. This LED device is capable of driving a backlight display.
In addition to the backlight the device has control of a strobe and torch output. Data sheet: http://www.ti.com/lit/ds/symlink/lm3632a.pdf Signed-off-by: Dan Murphy <dmur...@ti.com> --- drivers/leds/Kconfig | 9 +- drivers/leds/Makefile | 1 + drivers/leds/leds-lm3632.c | 547 +++++++++++++++++++++++++++++++++++++ 3 files changed, 556 insertions(+), 1 deletion(-) create mode 100644 drivers/leds/leds-lm3632.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 1a78588d9806..7879b9048332 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -764,8 +764,15 @@ config LEDS_LM3697 This supports the LED device LM3697. config LEDS_LM3633 - tristate "LED driver for LM3633" + tristate "LED driver for LM3632" depends on LEDS_TI_LMU_COMMON + help + Say Y to enable the LED driver for TI LMU devices. + This supports the LED device LM3632. + +config LEDS_LM3632 + tristate "LED driver for LM3632" + depends on LEDS_TI_LMU_COMMON help Say Y to enable the LED driver for TI LMU devices. This supports the LED device LM3633. diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 6ec006892fc0..53d02d7f1a0b 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o +obj-$(CONFIG_LEDS_LM3632) += leds-lm3632.o obj-$(CONFIG_LEDS_LM3633) += leds-lm3633.o obj-$(CONFIG_LEDS_TI_LMU_COMMON) += ti-lmu-led-common.o diff --git a/drivers/leds/leds-lm3632.c b/drivers/leds/leds-lm3632.c new file mode 100644 index 000000000000..7d487cf423bc --- /dev/null +++ b/drivers/leds/leds-lm3632.c @@ -0,0 +1,547 @@ +// SPDX-License-Identifier: GPL-2.0 +// Flash and torch driver for Texas Instruments LM3632 LED +// Flash driver chip family +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/led-class-flash.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <uapi/linux/uleds.h> + +#include "ti-lmu-led-common.h" + +#define LM3632_MODE_BL 0x0 +#define LM3632_MODE_TORCH 0x1 + +/* Registers */ +#define LM3632_REV_REG 0x01 +#define LM3632_CFG1_REG 0x02 +#define LM3632_CFG2_REG 0x03 +#define LM3633_BL_BRT_LSB 0x04 +#define LM3633_BL_BRT_MSB 0x05 +#define LM3632_FLASH_TORCH_BRT 0x06 +#define LM3632_FLASH_CFG 0x07 +#define LM3632_ENABLE_REG 0x0a +#define LM3632_FLAGS1_REG 0x0b +#define LM3632_FLAGS2_REG 0x10 + +/* Enable Mode bits */ +#define LM3632_BL_EN BIT(0) +#define LM3632_STROBE_EN BIT(1) +#define LM3632_FLASH_MODE BIT(2) +#define LM3632_BLED1_2_EN BIT(3) +#define LM3632_BLED1_EN BIT(4) +#define LM3632_BL_OVP_EN BIT(6) +#define LM3632_SW_RESET BIT(7) + +/* Flags 1 Mask */ +#define LM3632_THERM_SHUTDOWN BIT(0) +#define LM3632_FLASH_TIME_OUT BIT(1) +#define LM3632_FLED_SHORT_FAULT BIT(2) +#define LM3632_VINM_SHORT_FAULT BIT(4) +#define LM3632_FOUT_SHORT_FAULT BIT(5) +#define LM3632_FLASH_OVP_FAULT BIT(6) +#define LM3632_BL_OVP_FAULT BIT(7) + +/* Flags 2 Mask */ +#define LM3632_BL_OCP_FAULT BIT(0) +#define LM3632_FLASH_OCP_FAULT BIT(1) +#define LM3632_VNEG_SHORT_FAULT BIT(2) +#define LM3632_VPOS_SHORT_FAULT BIT(3) +#define LM3632_VNEG_OVP_FAULT BIT(4) +#define LM3632_LCM_OVP_FAULT BIT(5) + +#define LM3632_TORCH_BRT_SHIFT 4 +#define LM3632_STROBE_REG_DIV 16 +#define LM3632_STROBE_STEP_UA 100000 + +#define LM3632_MAX_TORCH_I_UA 375000 +#define LM3632_MIN_TORCH_I_UA 2500 + +#define LM3632_MAX_STROBE_I_UA 1500000 +#define LM3632_MIN_STROBE_I_UA 10000 + +#define LM3632_TIMEOUT_MASK 0x1e +#define LM3632_ENABLE_MASK (LM3632_BL_EN | LM3632_STROBE_EN) + +#define LM3632_TIMEOUT_STEP_US 32000 +#define LM3632_MIN_TIMEOUT_US 32000 +#define LM3632_MAX_TIMEOUT_US 1024000 + +#define LM3632_TORCH_BRT_MASK 0x0f +#define LM3632_FLASH_BRT_MASK 0xf0 + +/** + * struct lm3632_led - + * @fled_cdev: flash LED class device pointer + * @led_name - LED label + * @led_dev - LED class device + * @priv - Pointer to the lm3632 struct + * @lmu_data - Register and setting values for common code + * @led_name: LED label for the Torch or IR LED + * @flash_timeout: the timeout for the flash + * @last_flag: last known flags register value + * @torch_current_max: maximum current for the torch + * @flash_current_max: maximum current for the flash + * @max_flash_timeout: maximum timeout for the flash + */ +struct lm3632_led { + struct led_classdev_flash fled_cdev; + char led_name[LED_MAX_NAME_SIZE]; + struct led_classdev led_dev; + struct ti_lmu_bank lmu_data; + struct lm3632 *priv; + + unsigned int flash_timeout; + unsigned int last_flag; + + u32 torch_current_max; + u32 flash_current_max; + u32 max_flash_timeout; +}; + +/** + * struct lm3632 - + * @client: Pointer to the I2C client + * @regmap: Devices register map + * @lock: Lock for reading/writing the device + * @leds - Array of LED strings + */ +struct lm3632 { + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + + struct lm3632_led leds[]; +}; + +static const struct reg_default lm3632_regmap_defs[] = { + { LM3632_CFG1_REG, 0x30 }, + { LM3632_CFG2_REG, 0x0d }, + { LM3632_FLASH_CFG, 0x2f }, + { LM3632_ENABLE_REG, 0x00 }, +}; + +static bool lm3632_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LM3632_FLAGS1_REG: + case LM3632_FLAGS2_REG: + return true; + default: + return false; + } +} + +static const struct regmap_config lm3632_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LM3632_FLAGS2_REG, + .reg_defaults = lm3632_regmap_defs, + .num_reg_defaults = ARRAY_SIZE(lm3632_regmap_defs), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = lm3632_volatile_reg, +}; + +static struct lm3632_led *fled_cdev_to_led(struct led_classdev_flash *fled_cdev) +{ + return container_of(fled_cdev, struct lm3632_led, fled_cdev); +} + +static int lm3632_read_faults(struct lm3632_led *led) +{ + struct lm3632 *priv = led->priv; + int flags_val; + int ret; + + ret = regmap_read(priv->regmap, LM3632_FLAGS1_REG, &flags_val); + if (ret < 0) + return -EIO; + + led->last_flag = 0; + + if (flags_val & LM3632_FLASH_OVP_FAULT) + led->last_flag |= LED_FAULT_OVER_VOLTAGE; + + if (flags_val & LM3632_THERM_SHUTDOWN) + led->last_flag |= LED_FAULT_OVER_TEMPERATURE; + + if (flags_val & (LM3632_FLED_SHORT_FAULT | LM3632_VINM_SHORT_FAULT | + LM3632_FOUT_SHORT_FAULT)) + led->last_flag |= LED_FAULT_SHORT_CIRCUIT; + + if (flags_val & LM3632_THERM_SHUTDOWN) + led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE; + + if (flags_val & LM3632_FLASH_TIME_OUT) + led->last_flag |= LED_FAULT_TIMEOUT; + + ret = regmap_read(priv->regmap, LM3632_FLAGS2_REG, &flags_val); + if (ret < 0) + return -EIO; + + if (flags_val & (LM3632_BL_OCP_FAULT | LM3632_FLASH_OCP_FAULT)) + led->last_flag |= LED_FAULT_OVER_CURRENT; + + if (flags_val & LM3632_FLASH_OCP_FAULT) + led->last_flag |= LED_FAULT_OVER_CURRENT; + + return led->last_flag; +} + +static int lm3632_backlight_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lm3632_led *led = container_of(cdev, struct lm3632_led, + led_dev); + struct lm3632 *priv = led->priv; + int ret; + + mutex_lock(&priv->lock); + + ret = ti_lmu_common_set_brightness(&led->lmu_data, brightness); + if (ret) + dev_err(&priv->client->dev, "Cannot write brightness\n"); + + mutex_unlock(&priv->lock); + return ret; +} + +static int lm3632_strobe_flash_brightness_set(struct lm3632_led *led, + u8 brightness_val) +{ + struct lm3632 *priv = led->priv; + int ret; + + if (brightness_val == LED_OFF) { + ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG, + LM3632_STROBE_EN, LED_OFF); + return ret; + } + + ret = regmap_update_bits(priv->regmap, LM3632_FLASH_TORCH_BRT, + LM3632_TORCH_BRT_MASK, brightness_val); + if (ret < 0) + return ret; + + return regmap_update_bits(priv->regmap, LM3632_ENABLE_REG, + LM3632_STROBE_EN, + LM3632_STROBE_EN); +} + +static int lm3632_torch_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev); + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + struct lm3632 *priv = led->priv; + int ret, brightness_val; + + mutex_lock(&priv->lock); + + ret = lm3632_read_faults(led); + if (ret < 0) + goto out; + + brightness_val = (brightness / 16); + + ret = lm3632_strobe_flash_brightness_set(led, brightness_val); + +out: + mutex_unlock(&priv->lock); + return ret; +} + +static int lm3632_strobe_set(struct led_classdev_flash *fled_cdev, + bool state) +{ + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + struct lm3632 *priv = led->priv; + int timeout_reg_val; + int current_timeout; + int ret; + + mutex_lock(&priv->lock); + + ret = regmap_read(priv->regmap, LM3632_FLASH_CFG, ¤t_timeout); + if (ret < 0) + goto out; + + if (led->flash_timeout != current_timeout) + ret = regmap_update_bits(priv->regmap, LM3632_FLASH_CFG, + LM3632_TIMEOUT_MASK, timeout_reg_val); + + if (state) + ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG, + LM3632_STROBE_EN, LM3632_STROBE_EN); + else + ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG, + LM3632_STROBE_EN, LED_OFF); + + ret = lm3632_read_faults(led); +out: + mutex_unlock(&priv->lock); + return ret; +} + +static int lm3632_flash_brightness_set(struct led_classdev_flash *fled_cdev, + u32 brightness) +{ + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + struct lm3632 *priv = led->priv; + u8 brightness_val; + int ret; + + mutex_lock(&priv->lock); + ret = lm3632_read_faults(led); + if (ret < 0) + goto out; + + brightness_val = (brightness / 16) << LM3632_TORCH_BRT_SHIFT; + + ret = lm3632_strobe_flash_brightness_set(led, brightness_val); +out: + mutex_unlock(&priv->lock); + return ret; +} + +static int lm3632_flash_timeout_set(struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + struct lm3632 *priv = led->priv; + + mutex_lock(&priv->lock); + + led->flash_timeout = timeout; + + mutex_unlock(&priv->lock); + + return 0; +} + +static int lm3632_strobe_get(struct led_classdev_flash *fled_cdev, bool *state) +{ + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + struct lm3632 *priv = led->priv; + int strobe_state; + int ret; + + mutex_lock(&priv->lock); + + ret = regmap_read(priv->regmap, LM3632_ENABLE_REG, &strobe_state); + if (ret < 0) + goto out; + + *state = strobe_state & LM3632_STROBE_EN; + +out: + mutex_unlock(&priv->lock); + return ret; +} + +static int lm3632_flash_fault_get(struct led_classdev_flash *fled_cdev, + u32 *fault) +{ + struct lm3632_led *led = fled_cdev_to_led(fled_cdev); + + lm3632_read_faults(led); + + *fault = led->last_flag; + + return 0; +} + +static const struct led_flash_ops flash_ops = { + .flash_brightness_set = lm3632_flash_brightness_set, + .strobe_set = lm3632_strobe_set, + .strobe_get = lm3632_strobe_get, + .timeout_set = lm3632_flash_timeout_set, + .fault_get = lm3632_flash_fault_get, +}; + +static int lm3632_register_strobe_leds(struct lm3632_led *led) +{ + struct led_classdev *led_cdev; + struct led_flash_setting *setting; + + led->fled_cdev.ops = &flash_ops; + + setting = &led->fled_cdev.timeout; + setting->min = LM3632_MIN_TIMEOUT_US; + setting->max = led->max_flash_timeout; + setting->step = LM3632_TIMEOUT_STEP_US; + setting->val = led->max_flash_timeout; + + setting = &led->fled_cdev.brightness; + setting->min = LM3632_MIN_STROBE_I_UA; + setting->max = led->flash_current_max; + setting->step = LM3632_STROBE_STEP_UA; + setting->val = led->flash_current_max; + + led_cdev = &led->fled_cdev.led_cdev; + led_cdev->name = led->led_name; + led_cdev->brightness_set_blocking = lm3632_torch_brightness_set; + led_cdev->max_brightness = led->torch_current_max; + + led_cdev->flags |= LED_DEV_CAP_FLASH; + + return led_classdev_flash_register(&led->priv->client->dev, &led->fled_cdev); +} + +static int lm3632_parse_node(struct lm3632 *priv) +{ + struct fwnode_handle *child = NULL; + struct lm3632_led *led; + int ret = -ENODEV; + const char *name; + u32 led_mode; + int i; + + device_for_each_child_node(priv->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &led_mode); + if (ret) { + dev_err(&priv->client->dev, "reg DT property missing\n"); + goto out_err; + } + + if (led_mode < LM3632_MODE_TORCH || + led_mode > LM3632_MODE_BL) { + dev_warn(&priv->client->dev, "Invalid led mode requested\n"); + ret = -EINVAL; + goto out_err; + } + + led = &priv->leds[i]; + led->priv = priv; + + ret = fwnode_property_read_string(child, "label", &name); + if (ret) { + if (led_mode == LM3632_MODE_TORCH) + name = "torch"; + else + name = "backlight"; + } + + snprintf(led->led_name, sizeof(led->led_name), + "%s:%s", priv->client->name, name); + + if (led_mode == LM3632_MODE_TORCH) { + ret = fwnode_property_read_u32(child, "led-max-microamp", + &led->torch_current_max); + if (ret) { + dev_warn(&priv->client->dev, + "led-max-microamp DT property missing\n"); + goto out_err; + } + + ret = fwnode_property_read_u32(child, "flash-max-microamp", + &led->flash_current_max); + if (ret) { + dev_warn(&priv->client->dev, + "flash-max-microamp DT property missing\n"); + goto out_err; + } + + ret = fwnode_property_read_u32(child, "flash-max-timeout-us", + &led->max_flash_timeout); + if (ret) { + dev_warn(&priv->client->dev, + "flash-max-timeout-us DT property missing\n"); + goto out_err; + } + + ret = lm3632_register_strobe_leds(led); + if (ret) { + dev_warn(&priv->client->dev, + "Failed to register flash LEDs\n"); + goto out_err; + } + + } else { + led->led_dev.name = led->led_name; + led->led_dev.brightness_set_blocking = lm3632_backlight_brightness_set; + led->lmu_data.regmap = priv->regmap; + led->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT; + led->lmu_data.lsb_brightness_reg = LM3633_BL_BRT_LSB; + led->lmu_data.msb_brightness_reg = LM3633_BL_BRT_MSB; + + ret = devm_led_classdev_register(priv->dev, &led->led_dev); + } + + i++; + } +out_err: + fwnode_handle_put(child); + return ret; +} + +static int lm3632_probe(struct i2c_client *client) +{ + struct lm3632 *led; + int ret; + + led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->client = client; + led->dev = &client->dev; + i2c_set_clientdata(client, led); + + led->regmap = devm_regmap_init_i2c(client, &lm3632_regmap); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, + "Failed to allocate register map: %d\n", ret); + return ret; + } + + mutex_init(&led->lock); + + return lm3632_parse_node(led); +} + +static int lm3632_remove(struct i2c_client *client) +{ + struct lm3632 *led = i2c_get_clientdata(client); + +/* led_classdev_flash_unregister(&led->fled_cdev);*/ + mutex_destroy(&led->lock); + + return regmap_update_bits(led->regmap, LM3632_ENABLE_REG, + LM3632_ENABLE_MASK, 0x00); +} + +static const struct i2c_device_id lm3632_id[] = { + { "LM3632", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm3632_id); + +static const struct of_device_id of_lm3632_leds_match[] = { + { .compatible = "ti,lm3632", }, + { } +}; +MODULE_DEVICE_TABLE(of, of_lm3632_leds_match); + +static struct i2c_driver lm3632_i2c_driver = { + .driver = { + .name = "lm3632", + .of_match_table = of_lm3632_leds_match, + }, + .probe_new = lm3632_probe, + .remove = lm3632_remove, + .id_table = lm3632_id, +}; +module_i2c_driver(lm3632_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3632"); +MODULE_AUTHOR("Dan Murphy <dmur...@ti.com>"); +MODULE_LICENSE("GPL v2"); -- 2.19.0
