[PATCH 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

[Gregory CLEMENT]

Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clem...@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 6 ++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi 
b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 64632c873888..f2fd777d1944 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -21,6 +21,7 @@
                        reg = <0x000>;
                        enable-method = "psci";
                        cpu-idle-states = <&CPU_SLEEP_0>;
+                       clocks = <&cpu_clk 0>;
                };
                cpu1: cpu@1 {
                        device_type = "cpu";
@@ -28,6 +29,7 @@
                        reg = <0x001>;
                        enable-method = "psci";
                        cpu-idle-states = <&CPU_SLEEP_0>;
+                       clocks = <&cpu_clk 0>;
                };
                cpu2: cpu@100 {
                        device_type = "cpu";
@@ -35,6 +37,7 @@
                        reg = <0x100>;
                        enable-method = "psci";
                        cpu-idle-states = <&CPU_SLEEP_0>;
+                       clocks = <&cpu_clk 1>;
                };
                cpu3: cpu@101 {
                        device_type = "cpu";
@@ -42,6 +45,7 @@
                        reg = <0x101>;
                        enable-method = "psci";
                        cpu-idle-states = <&CPU_SLEEP_0>;
+                       clocks = <&cpu_clk 1>;
                };
        };
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi 
b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 4a65e4e830aa..27c840e91abe 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -280,6 +280,12 @@
                                #address-cells = <1>;
                                #size-cells = <1>;
 
+                               cpu_clk: clock-cpu {
+                                       compatible = "marvell,ap806-cpu-clock";
+                                       clocks = <&ap_clk 0>, <&ap_clk 1>;
+                                       #clock-cells = <1>;
+                               };
+
                                ap_thermal: thermal-sensor@80 {
                                        compatible = 
"marvell,armada-ap806-thermal";
                                        reg = <0x80 0x10>;
-- 
2.19.0