On 07-09-18, 08:24, Andrea Merello wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pan...@xilinx.com>
>
> AXI-DMA IP supports configurable (c_sg_length_width) buffer length
> register width, hence read buffer length (xlnx,sg-length-width) DT
> property and ensure that driver doesn't program buffer length
> exceeding the supported limit. For VDMA and CDMA there is no change.
>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pan...@xilinx.com>
> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
> Signed-off-by: Andrea Merello <andrea.mere...@gmail.com> [rebase, reword]
> ---
> Changes in v2:
> - drop original patch and replace with the one in Xilinx tree
> Changes in v3:
> - cc DT maintainers/ML
> Changes in v4:
> - upper bound for the property should be 26, not 23
> - add warn for width > 23 as per xilinx original patch
> - rework due to changes introduced in 1/6
> Changes in v5:
> None
> ---
> drivers/dma/xilinx/xilinx_dma.c | 36 +++++++++++++++++++++++++--------
> 1 file changed, 28 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index aaa6de8a70e4..b17f24e4ec35 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -158,7 +158,9 @@
> #define XILINX_DMA_REG_BTT 0x28
>
> /* AXI DMA Specific Masks/Bit fields */
> -#define XILINX_DMA_MAX_TRANS_LEN GENMASK(22, 0)
> +#define XILINX_DMA_MAX_TRANS_LEN_MIN 8
> +#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
> +#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
> #define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
> #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
> #define XILINX_DMA_CR_COALESCE_SHIFT 16
> @@ -418,6 +420,7 @@ struct xilinx_dma_config {
> * @rxs_clk: DMA s2mm stream clock
> * @nr_channels: Number of channels DMA device supports
> * @chan_id: DMA channel identifier
> + * @max_buffer_len: Max buffer length
> */
> struct xilinx_dma_device {
> void __iomem *regs;
> @@ -437,6 +440,7 @@ struct xilinx_dma_device {
> struct clk *rxs_clk;
> u32 nr_channels;
> u32 chan_id;
> + u32 max_buffer_len;
> };
>
> /* Macros */
> @@ -964,7 +968,7 @@ static int xilinx_dma_calc_copysize(struct
> xilinx_dma_chan *chan,
> int size, int done)
> {
> size_t copy = min_t(size_t, size - done,
> - XILINX_DMA_MAX_TRANS_LEN);
> + chan->xdev->max_buffer_len);
hmm why not add max_buffer_len in patch 1 again, and then use default
len as XILINX_DMA_MAX_TRANS_LEN and add multiple lengths here :)
-
~Vinod
