Thanks for your review,

On 10/09/18 21:06, Rob Herring wrote:
On Tue, Sep 04, 2018 at 11:24:57AM +0100, Srinivas Kandagatla wrote:
This patch add new bindings required to support MBHC
(Multi Button Headset Control) block in the codec.
This block is used for jack insert/removal detection,
headset type detection and 8 button press/release events.

All these properties are very much specific to board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
  .../bindings/sound/qcom,wcd9335.txt           | 20 +++++++++++++++++++
  1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt 
b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..4d56c3ca9fa8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -55,6 +55,26 @@ Required properties with SLIMbus Interface:
        Value type: <string>
        Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+- o qcom,mbhc-vthreshold:

Needs unit suffix.

Make sense, I will modify it

qcom,mbhc-vthreshold-millivolt

>

+       Usage: Optional, only required if headset button support required.
+       Value type: <u32 array>
+       Definition: Must contain an array of 8 threshold voltages in mV for
+                8 buttons detection on headset.
+
+- qcom,hphl-jack-type-normally-open:
+       Usage: Optional, only required if headset button support required.

It's not required if the pin is NC, right?



+       Value type: <boolean>
+       Definition: present if hphl pin on jack is a NO (Normally Open).
+               If not specified, then its assumed that hphl pin on jack
+               is NC (Normally Closed).

Is the not specified case the more common case? If not, it should be.
Yes, that is correct. In normal uscases we do not need these properties.

+
+- qcom,gnd-jack-type-normally-open:
+       Usage: Optional, only required if headset button support required.

Same here.


+       Value type: <boolean>
+       Definition: present if gnd pin on jack is NO (Normally Open).
+                If not specified, then its assumed that gnd pin on
+                jack is NC  (Normally Closed).
+
  - vdd-buck-supply:
        Usage: required
        Value type: <phandle>
--
2.18.0

Reply via email to