On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote: > From: Rajesh Bhagat <[email protected]> > > Add "configure-gfladj" boolean property to USB3 node. This property
I do not see where this property is documented as bindings and how driver is using it. Shawn > is used to determine whether frame length adjustment is required or > not > > Signed-off-by: Rajesh Bhagat <[email protected]> > Signed-off-by: Ran Wang <[email protected]> > Signed-off-by: Yinbo Zhu <[email protected]> > --- > Change in v2: > Modified some word misspellings in commit information > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index 7881e3d..ed3fa79 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -609,6 +609,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb1: usb3@3000000 { > @@ -618,6 +619,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb2: usb3@3100000 { > @@ -627,6 +629,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > sata: sata@3200000 { > -- > 1.7.1 >
