Add support for the MikroElektronika PROTO audio codec board.

URL to the audio chip:
http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/

Signed-off-by: Florian Meier <florian.me...@koalo.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
---
 sound/soc/atmel/Kconfig        |   7 ++
 sound/soc/atmel/Makefile       |   2 +
 sound/soc/atmel/mikroe-proto.c | 189 +++++++++++++++++++++++++++++++++
 3 files changed, 198 insertions(+)
 create mode 100644 sound/soc/atmel/mikroe-proto.c

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 539ef33e670a..fbf4d3e42c18 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -97,4 +97,11 @@ config SND_ATMEL_SOC_I2S
        help
          Say Y or M if you want to add support for Atmel ASoc driver for boards
          using I2S.
+
+config SND_SOC_MIKROE_PROTO
+       tristate "Support for Mikroe-PROTO board"
+       depends on OF
+       select SND_SOC_WM8731
+       help
+         Say Y or M if you want to add support for Audio Codec Board PROTO 
(WM8731).
 endif
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index cd87cb4bcff5..9f41bfa0fea3 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -17,6 +17,7 @@ snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
 snd-atmel-soc-classd-objs := atmel-classd.o
 snd-atmel-soc-pdmic-objs := atmel-pdmic.o
 snd-atmel-soc-tse850-pcm5142-objs := tse850-pcm5142.o
+snd-soc-mikroe-proto-objs := mikroe-proto.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += 
snd-soc-sam9x5-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_CLASSD) += snd-atmel-soc-classd.o
 obj-$(CONFIG_SND_ATMEL_SOC_PDMIC) += snd-atmel-soc-pdmic.o
 obj-$(CONFIG_SND_ATMEL_SOC_TSE850_PCM5142) += snd-atmel-soc-tse850-pcm5142.o
+obj-$(CONFIG_SND_SOC_MIKROE_PROTO) += snd-soc-mikroe-proto.o
diff --git a/sound/soc/atmel/mikroe-proto.c b/sound/soc/atmel/mikroe-proto.c
new file mode 100644
index 000000000000..9d9dc1c8ac6b
--- /dev/null
+++ b/sound/soc/atmel/mikroe-proto.c
@@ -0,0 +1,189 @@
+/*
+ * ASoC driver for PROTO AudioCODEC (with a WM8731)
+ *
+ * Author:      Florian Meier, <ko...@koalo.de>
+ *           Copyright 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "../codecs/wm8731.h"
+
+#define XTAL_RATE 12288000     /* This is fixed on this board */
+
+static const unsigned int wm8731_rates_12288000[] = {
+       8000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = {
+       .list = wm8731_rates_12288000,
+       .count = ARRAY_SIZE(wm8731_rates_12288000),
+};
+
+static int snd_proto_startup(struct snd_pcm_substream *substream)
+{
+       /* Setup constraints, because there is a 12.288 MHz XTAL on the board */
+       snd_pcm_hw_constraint_list(substream->runtime, 0,
+                                  SNDRV_PCM_HW_PARAM_RATE,
+                                  &wm8731_constraints_12288000);
+       return 0;
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_proto_ops = {
+       .startup = snd_proto_startup,
+};
+
+static int snd_proto_init(struct snd_soc_pcm_runtime *rtd)
+{
+       struct snd_soc_codec *codec = rtd->codec;
+       struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+       /* Set proto sysclk */
+       int ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+                                        XTAL_RATE, SND_SOC_CLOCK_IN);
+       if (ret < 0) {
+               dev_err(codec->dev, "Failed to set WM8731 SYSCLK: %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static const struct snd_soc_dapm_widget snd_proto_widget[] = {
+       SND_SOC_DAPM_MIC("Microphone Jack", NULL),
+       SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route snd_proto_route[] = {
+       /* speaker connected to LHPOUT/RHPOUT */
+       {"Headphone Jack", NULL, "LHPOUT"},
+       {"Headphone Jack", NULL, "RHPOUT"},
+
+       /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+       {"MICIN", NULL, "Mic Bias"},
+       {"Mic Bias", NULL, "Microphone Jack"},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_proto = {
+       .name           = "snd_mikroe_proto",
+       .owner          = THIS_MODULE,
+       .dapm_widgets   = snd_proto_widget,
+       .num_dapm_widgets = ARRAY_SIZE(snd_proto_widget),
+       .dapm_routes    = snd_proto_route,
+       .num_dapm_routes = ARRAY_SIZE(snd_proto_route),
+};
+
+static int snd_proto_probe(struct platform_device *pdev)
+{
+       struct snd_soc_dai_link *dai;
+       struct device_node *np = pdev->dev.of_node;
+       struct device_node *codec_np, *cpu_np;
+       struct device_node *bitclkmaster = NULL;
+       struct device_node *framemaster = NULL;
+       unsigned int dai_fmt;
+       int ret = 0;
+
+       if (!np) {
+               dev_err(&pdev->dev, "No device node supplied\n");
+               return -EINVAL;
+       }
+
+       snd_proto.dev = &pdev->dev;
+       ret = snd_soc_of_parse_card_name(&snd_proto, "model");
+       if (ret)
+               return ret;
+
+       dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL);
+       if (!dai)
+               return -ENOMEM;
+
+       snd_proto.dai_link = dai;
+       snd_proto.num_links = 1;
+
+       dai->name = "WM8731";
+       dai->stream_name = "WM8731 HiFi";
+       dai->codec_dai_name = "wm8731-hifi";
+       dai->init = &snd_proto_init;
+       dai->ops = &snd_proto_ops;
+
+       codec_np = of_parse_phandle(np, "audio-codec", 0);
+       if (!codec_np) {
+               dev_err(&pdev->dev, "audio-codec node missing\n");
+               return -EINVAL;
+       }
+       dai->codec_of_node = codec_np;
+
+       cpu_np = of_parse_phandle(np, "i2s-controller", 0);
+       if (!cpu_np) {
+               dev_err(&pdev->dev, "i2s-controller missing\n");
+               return -EINVAL;
+       }
+       dai->cpu_of_node = cpu_np;
+       dai->platform_of_node = cpu_np;
+
+       dai_fmt = snd_soc_of_parse_daifmt(np, NULL,
+                                         &bitclkmaster, &framemaster);
+       if (bitclkmaster != framemaster) {
+               dev_err(&pdev->dev, "Must be the same bitclock and frame 
master\n");
+               return -EINVAL;
+       }
+       if (bitclkmaster) {
+               dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
+               if (codec_np == bitclkmaster)
+                       dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+               else
+                       dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
+       }
+       of_node_put(bitclkmaster);
+       of_node_put(framemaster);
+       dai->dai_fmt = dai_fmt;
+
+       of_node_put(codec_np);
+       of_node_put(cpu_np);
+
+       ret = snd_soc_register_card(&snd_proto);
+       if (ret && ret != -EPROBE_DEFER)
+               dev_err(&pdev->dev,
+                       "snd_soc_register_card() failed: %d\n", ret);
+
+       return ret;
+}
+
+static int snd_proto_remove(struct platform_device *pdev)
+{
+       return snd_soc_unregister_card(&snd_proto);
+}
+
+static const struct of_device_id snd_proto_of_match[] = {
+       { .compatible = "mikroe,mikroe-proto", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, snd_proto_of_match);
+
+static struct platform_driver snd_proto_driver = {
+       .driver = {
+               .name   = "snd-mikroe-proto",
+               .owner  = THIS_MODULE,
+               .of_match_table = snd_proto_of_match,
+       },
+       .probe    = snd_proto_probe,
+       .remove  = snd_proto_remove,
+};
+
+module_platform_driver(snd_proto_driver);
+
+MODULE_AUTHOR("Florian Meier");
+MODULE_DESCRIPTION("ASoC Driver for PROTO board (WM8731)");
+MODULE_LICENSE("GPL");
-- 
2.17.1

Reply via email to