Add devicetree binding for Xilinx AXI Multichannel Direct Memory Access
(AXI MCDMA) IP. The AXI MCDMA provides high-bandwidth direct memory
access between memory and AXI4-Stream target peripherals. The AXI MCDMA
core provides scatter-gather interface with multiple channel support.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pan...@xilinx.com>
---
Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 174af2c..57bb02e 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -11,9 +11,13 @@ is to receive from the device.
Xilinx AXI CDMA engine, it does transfers between memory-mapped source
address and a memory-mapped destination address.
+Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
+target devices. It can be configured to have up to 16 independent transmit
+and receive channels.
+
Required properties:
- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
- "xlnx,axi-cdma-1.00.a""
+ "xlnx,axi-cdma-1.00.a" or "xlnx,axi-mcdma-1.00.a".
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
@@ -56,6 +60,8 @@ Required child node properties:
For CDMA: It should be "xlnx,axi-cdma-channel".
For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or
"xlnx,axi-dma-s2mm-channel".
+ For MCDMA: It should be either "xlnx,axi-mcdma-mm2s-channel" or
+ "xlnx,axi-mcdma-s2mm-channel".
- interrupts: Should contain per channel VDMA interrupts.
- xlnx,datawidth: Should contain the stream data width, take values
{32,64...1024}.
@@ -68,7 +74,7 @@ Optional child node properties for VDMA:
enabled/disabled in hardware.
- xlnx,enable-vert-flip: Tells vertical flip is
enabled/disabled in hardware(S2MM path).
-Optional child node properties for AXI DMA:
+Optional child node properties for AXI DMA and MCDMA:
-dma-channels: Number of dma channels in child node.
Example:
--
2.7.4
