On Fri, 20 Jul 2018 17:15:23 +0200
Miquel Raynal <miquel.ray...@bootlin.com> wrote:
> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
>
> Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
> ---
> drivers/mtd/nand/raw/jz4740_nand.c | 46
> ++++++++++++++++++++++++--------------
> 1 file changed, 29 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/jz4740_nand.c
> b/drivers/mtd/nand/raw/jz4740_nand.c
> index 9bb8a89e09f9..8f821fdf8a1c 100644
> --- a/drivers/mtd/nand/raw/jz4740_nand.c
> +++ b/drivers/mtd/nand/raw/jz4740_nand.c
> @@ -59,6 +59,7 @@
>
> struct jz_nand {
> struct nand_chip chip;
> + struct platform_device *pdev;
You don't need this field. You can just do
to_platform_device(mtd->dev.parent) to get the platform_device.
> void __iomem *base;
> struct resource *mem;
>
> @@ -329,8 +330,8 @@ static int jz_nand_detect_bank(struct platform_device
> *pdev,
> writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
>
> if (chipnr == 0) {
> - /* Detect first chip. */
> - ret = nand_scan_ident(mtd, 1, NULL);
> + /* Detect the first chip and register it */
> + ret = nand_scan(mtd, 1);
> if (ret)
> goto notfound_id;
>
> @@ -367,6 +368,25 @@ static int jz_nand_detect_bank(struct platform_device
> *pdev,
> return ret;
> }
>
> +static int jz_nand_attach_chip(struct nand_chip *chip)
> +{
> + struct mtd_info *mtd = nand_to_mtd(chip);
> + struct jz_nand *nand = mtd_to_jz_nand(mtd);
> + struct device *dev = mtd->dev.parent;
> + struct jz_nand_platform_data *pdata = dev_get_platdata(dev);
> +
> + if (pdata && pdata->ident_callback) {
> + pdata->ident_callback(nand->pdev, mtd, &pdata->partitions,
> + &pdata->num_partitions);
> + }
Curly braces are not needed.
> +
> + return 0;
> +}
> +
> +static const struct nand_controller_ops jz_nand_controller_ops = {
> + .attach_chip = jz_nand_attach_chip,
> +};
> +
> static int jz_nand_probe(struct platform_device *pdev)
> {
> int ret;
> @@ -397,6 +417,7 @@ static int jz_nand_probe(struct platform_device *pdev)
> mtd = nand_to_mtd(chip);
> mtd->dev.parent = &pdev->dev;
> mtd->name = "jz4740-nand";
> + nand->pdev = pdev;
>
> chip->ecc.hwctl = jz_nand_hwctl;
> chip->ecc.calculate = jz_nand_calculate_ecc_rs;
> @@ -410,6 +431,7 @@ static int jz_nand_probe(struct platform_device *pdev)
> chip->chip_delay = 50;
> chip->cmd_ctrl = jz_nand_cmd_ctrl;
> chip->select_chip = jz_nand_select_chip;
> + chip->dummy_controller.ops = &jz_nand_controller_ops;
>
> if (nand->busy_gpio)
> chip->dev_ready = jz_nand_dev_ready;
> @@ -450,20 +472,10 @@ static int jz_nand_probe(struct platform_device *pdev)
> else
> nand->banks[chipnr] = 0;
> }
> +
> if (chipnr == 0) {
> dev_err(&pdev->dev, "No NAND chips found\n");
> - goto err_iounmap_mmio;
> - }
> -
> - if (pdata && pdata->ident_callback) {
> - pdata->ident_callback(pdev, mtd, &pdata->partitions,
> - &pdata->num_partitions);
> - }
> -
> - ret = nand_scan_tail(mtd);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to scan NAND\n");
> - goto err_unclaim_banks;
> + goto err_nand_release;
> }
As for the atmel driver, I'd prefer to have one patch to moves
nand_scan_ident() and nand_scan_tail() in the same function so that the
transition to nand_scan()+attach_chip is easier to review.
>
> ret = mtd_device_register(mtd, pdata ? pdata->partitions : NULL,
> @@ -471,15 +483,13 @@ static int jz_nand_probe(struct platform_device *pdev)
>
> if (ret) {
> dev_err(&pdev->dev, "Failed to add mtd device\n");
> - goto err_nand_release;
> + goto err_unclaim_banks;
> }
>
> dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
>
> return 0;
>
> -err_nand_release:
> - nand_release(mtd);
> err_unclaim_banks:
> while (chipnr--) {
> unsigned char bank = nand->banks[chipnr];
> @@ -487,6 +497,8 @@ static int jz_nand_probe(struct platform_device *pdev)
> nand->bank_base[bank - 1]);
> }
> writel(0, nand->base + JZ_REG_NAND_CTRL);
> +err_nand_release:
> + nand_release(mtd);
> err_iounmap_mmio:
> jz_nand_iounmap_resource(nand->mem, nand->base);
> err_free:
