On 7 July 2018 at 16:45, Simon Shields <si...@lineageos.org> wrote:
> Currently, we assume that the bootloader has correctly configured
> the interrupt pin for max77693. This might not actually be the case -
> so it's better to configure it explicitly.
>
> Signed-off-by: Simon Shields <si...@lineageos.org>
> ---
> arch/arm/boot/dts/exynos4412-midas.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi
> b/arch/arm/boot/dts/exynos4412-midas.dtsi
> index f35176a35a15..30760bf2eb71 100644
> --- a/arch/arm/boot/dts/exynos4412-midas.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
> @@ -156,6 +156,8 @@
> compatible = "maxim,max77693";
> interrupt-parent = <&gpx1>;
> interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77693_irq>;
> reg = <0x66>;
>
> regulators {
> @@ -1117,6 +1119,13 @@
> samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> };
>
> + max77693_irq: max77693-irq {
> + samsung,pins = "gpx1-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +
Please put it before hdmi-hpd (gpx3-7). What about the interrupt for
max77693 fuel gauge? Maybe another patch for it as well?
Best regards,
Krzysztof
> sleep1: sleep-states {
> PIN_SLP(gpk0-0, PREV, NONE);
> PIN_SLP(gpk0-1, PREV, NONE);
> --
> 2.18.0
>
