Quoting Amit Kucheria (2018-07-02 05:44:09)
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors.
>
> Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..edf8505 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
> #interrupt-cells = <2>;
> };
>
> + tsens0: tsens@c222000 {
These unit addresses should match the first reg property, not the second
one.
> + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
> + reg = <0xc263000 0x1ff>, /* TM */
> + <0xc222000 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: tsens@c223000 {
> + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
> + reg = <0xc265000 0x1ff>, /* TM */
> + <0xc223000 0x1ff>; /* SROT */
> + #qcom,sensors = <8>;
