Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
 drivers/mtd/nand/raw/txx9ndfmc.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index b567d212fe7d..cac22dda799e 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -254,21 +254,17 @@ static void txx9ndfmc_initialize(struct platform_device 
*dev)
 #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
        DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
 
-static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+static int txx9ndfmc_attach_chip(struct nand_chip *chip)
 {
-       struct nand_chip *chip = mtd_to_nand(mtd);
-       int ret;
+       struct mtd_info *mtd = nand_to_mtd(chip);
 
-       ret = nand_scan_ident(mtd, 1, NULL);
-       if (!ret) {
-               if (mtd->writesize >= 512) {
-                       /* Hardware ECC 6 byte ECC per 512 Byte data */
-                       chip->ecc.size = 512;
-                       chip->ecc.bytes = 6;
-               }
-               ret = nand_scan_tail(mtd);
+       if (mtd->writesize >= 512) {
+               /* Hardware ECC 6 byte ECC per 512 Byte data */
+               chip->ecc.size = 512;
+               chip->ecc.bytes = 6;
        }
-       return ret;
+
+       return 0;
 }
 
 static int __init txx9ndfmc_probe(struct platform_device *dev)
@@ -332,7 +328,7 @@ static int __init txx9ndfmc_probe(struct platform_device 
*dev)
                chip->ecc.correct = txx9ndfmc_correct_data;
                chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
                chip->ecc.mode = NAND_ECC_HW;
-               /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
+               /* nand_scan() will overwrite ecc.size and ecc.bytes */
                chip->ecc.size = 256;
                chip->ecc.bytes = 3;
                chip->ecc.strength = 1;
@@ -359,7 +355,8 @@ static int __init txx9ndfmc_probe(struct platform_device 
*dev)
                if (plat->wide_mask & (1 << i))
                        chip->options |= NAND_BUSWIDTH_16;
 
-               if (txx9ndfmc_nand_scan(mtd)) {
+               chip->controller->attach_chip = txx9ndfmc_attach_chip;
+               if (nand_scan(mtd, 1)) {
                        kfree(txx9_priv->mtdname);
                        kfree(txx9_priv);
                        continue;
-- 
2.14.1

Reply via email to