There's already a USB PHY with reg of zero on that bus - usbphy0, used by usbotg (included from imx51.dtsi). Move usbh1phy to @1 avoid address collision.
Cc: Fabio Estevam <[email protected]> Cc: Shawn Guo <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Andrey Smirnov <[email protected]> --- arch/arm/boot/dts/imx51-babbage.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index b8ca73d3d379..541c6e67ad1a 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -175,9 +175,9 @@ #size-cells = <0>; compatible = "simple-bus"; - usbh1phy: usbh1phy@0 { + usbh1phy: usbh1phy@1 { compatible = "usb-nop-xceiv"; - reg = <0>; + reg = <1>; clocks = <&clk_usb>; clock-names = "main_clk"; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; -- 2.17.1
