On 04-06-18, 16:16, Taniya Das wrote:
> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
> SoCs. This is required for managing the cpu frequency transitions which are
> controlled by firmware.
>
> Signed-off-by: Taniya Das <t...@codeaurora.org>
> ---
> .../bindings/cpufreq/cpufreq-qcom-fw.txt | 173
> +++++++++++++++++++++
> 1 file changed, 173 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
> b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
> new file mode 100644
> index 0000000..e3087ec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
> @@ -0,0 +1,173 @@
> +Qualcomm Technologies, Inc. CPUFREQ Bindings
> +
> +CPUFREQ FW is a hardware engine used by some Qualcomm Technologies, Inc.
> (QTI)
> +SoCs to manage frequency in hardware. It is capable of controlling frequency
> +for multiple clusters.
> +
> +Properties:
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: must be "qcom,cpufreq-fw".
> +
> +* Property qcom,freq-domain
> +Devices supporting freq-domain must set their "qcom,freq-domain" property
> with
> +phandle to a freq_domain_table in their DT node.
> +
> +* Frequency Domain Table Node
> +
> +This describes the frequency domain belonging to a device.
> +This node can have following properties:
> +
> +- reg
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Addresses and sizes for the memory of the perf
> + , lut and enable bases.
> + perf - indicates the base address for the desired
> + performance state to be set.
> + lut - indicates the look up table base address for the
> + cpufreq driver to read frequencies.
> + enable - indicates the enable register for firmware.
> +- reg-names
> + Usage: required
> + Value type: <stringlist>
> + Definition: Address names. Must be "perf", "lut", "enable".
> + Must be specified in the same order as the reg property.
> +
> +Example:
> +
> +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
> +DCVS state together.
> +
> +/ {
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&freq_domain_table0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_100>;
> + qcom,freq-domain = <&freq_domain_table0>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_200>;
> + qcom,freq-domain = <&freq_domain_table0>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_300>;
> + qcom,freq-domain = <&freq_domain_table0>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + next-level-cache = <&L2_400>;
> + qcom,freq-domain = <&freq_domain_table1>;
> + L2_400: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + next-level-cache = <&L2_500>;
> + qcom,freq-domain = <&freq_domain_table1>;
> + L2_500: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU6: cpu@600 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x600>;
> + enable-method = "psci";
> + next-level-cache = <&L2_600>;
> + qcom,freq-domain = <&freq_domain_table1>;
> + L2_600: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU7: cpu@700 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x700>;
> + enable-method = "psci";
> + next-level-cache = <&L2_700>;
> + qcom,freq-domain = <&freq_domain_table1>;
> + L2_700: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> + };
> +
> + qcom,cpufreq-fw {
> + compatible = "qcom,cpufreq-fw";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + freq_domain_table0 : freq_table0 {
> + reg = <0x17d43920 0x4>, <0x17d43110 0x500>,
> + <0x17d41000 0x4>;
> + reg-names = "perf", "lut", "enable";
> + };
> +
> + freq_domain_table1 : freq_table1 {
> + reg = <0x17d46120 0x4>, <0x17d45910 0x500>,
> + <0x17d45800 0x4> ;
> + reg-names = "perf", "lut", "enable";
> + };
> + };
Looks better now from design point of view now, no ugly CPU lists :)
Unless Rob finds something wrong with the bindings:
Acked-by: Viresh Kumar <viresh.ku...@linaro.org>
--
viresh
