On Thu, Dec 07, 2000 at 10:46:08PM +0000, Russell King wrote:
> It appears to be caused by the pci_read_bridge_bases code copying the
> pointer to the resources instead of making a copy of the resources
> themselves.
No, pci_read_bridge_bases() is obsoleted by new pci setup code. ;-)
You have to set up bus resources properly in pcibios_fixup_bus().
For a single root bus configuration, you don't need to do anything
with the root bus itself - its resources already point to ioport_resource
and iomem_resource, which should be ok. For pci-pci bridges you have
to add something like this:
struct pci_dev *bridge = bus->self;
if (bridge) {
int i;
for(i=0; i<3; i++) {
bus->resource[i] =
&bridge->resource[PCI_BRIDGE_RESOURCES+i];
bus->resource[i]->name = bus->name;
}
bus->resource[0]->flags = pci_bridge_check_io(bridge);
bus->resource[1]->flags = IORESOURCE_MEM;
bus->resource[0]->end = ioport_resource.end;
bus->resource[1]->end = iomem_resource.end;
/* Turn off downstream PF memory address range by default */
bus->resource[2]->start = 1024*1024;
bus->resource[2]->end = bus->resource[2]->start - 1;
}
Check arch/alpha/kernel/pci.c:pcibios_fixup_bus() for reference.
Ivan.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
