On Wed, May 9, 2018 at 10:58 AM, Jack Wang <jack.wang.us...@gmail.com> wrote:
> ---------- Forwarded message ----------
> From: Gioh Kim <gi-oh....@profitbricks.com>
> Date: 2018-05-02 13:08 GMT+02:00
> Subject: [PATCH] md/raid1: add error handling of read error from FailFast
> device
> To: s...@kernel.org
> 抄送： linux-r...@vger.kernel.org, linux-kernel@vger.kernel.org, Gioh Kim
> <gi-oh....@profitbricks.com>
>
>
> Current handle_read_error() function calls fix_read_error()
> only if md device is RW and rdev does not include FailFast flag.
> It does not handle a read error from a RW device including
> FailFast flag.
>
> I am not sure it is intended. But I found that write IO error
> sets rdev faulty. The md module should handle the read IO error and
> write IO error equally. So I think read IO error should set rdev faulty.
>
> Signed-off-by: Gioh Kim <gi-oh....@profitbricks.com>
> ---
> drivers/md/raid1.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
> index e9e3308cb0a7..4445179aa4c8 100644
> --- a/drivers/md/raid1.c
> +++ b/drivers/md/raid1.c
> @@ -2474,6 +2474,8 @@ static void handle_read_error(struct r1conf
> *conf, struct r1bio *r1_bio)
> fix_read_error(conf, r1_bio->read_disk,
> r1_bio->sector, r1_bio->sectors);
> unfreeze_array(conf);
> + } else if (mddev->ro == 0 && test_bit(FailFast, &rdev->flags)) {
> + md_error(mddev, rdev);
> } else {
> r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED;
> }
> --
> 2.14.1
Patch looks good to me!
Reviewed-by: Jack Wang <jinpu.w...@profitbricks.com>
--
Jack Wang
Linux Kernel Developer
ProfitBricks GmbH
Greifswalder Str. 207
D - 10405 Berlin
Tel: +49 30 577 008 042
Fax: +49 30 577 008 299
Email: jinpu.w...@profitbricks.com
URL: https://www.profitbricks.de
Sitz der Gesellschaft: Berlin
Registergericht: Amtsgericht Charlottenburg, HRB 125506 B
Geschäftsführer: Achim Weiss, Matthias Steinberg, Christoph Steffens
