On Sunday 10 June 2007 02:03:03 am Andrey Borzenkov wrote: > > Can you set CONFIG_ACPI_DEBUG=y, make it so smsc-ircc2 isn't loaded > > automatically, and try this (along with my previous patch to swap > > FIR and SIR): > > > > # dmesg -n 8 > > # echo 0x200 > /sys/module/acpi/parameters/debug_level > > # echo disable > /sys/bus/pnp/devices/00:0a/resources > > # echo activate > /sys/bus/pnp/devices/00:0a/resources > > # modprobe smsc-ircc2 > > > > If you try this, can you collect the whole dmesg log? > > well, dmesg (/var/log/messages) is around 35MB :) Even bz2 compressed it is > over 700KB. I put it here: > http://dump.ru:80/loadfile.php?filename=fir_acpi_debug.bz2&id=379192 > > This is from /var/log/messages. I do not have serial console and cannot > capture output directly; I can only hope nothing is lost at this rate.
Wow, that is big :-) I guess smsc-ircc2 still didn't find the device, so you got something like this: smsc_ircc_present(), addr 0x02e8 - no device found! Right? I'm out of ideas, and I don't want to waste more of your time on this. I'm going to try to find a Portege 4000 to play with myself. That might take a few days, and I'm going to be out of the office from June 20-July 9, so I'm afraid it will be slow. But I *will* fix it! Bjorn - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
