On Saturday 09 June 2007 15:10:31 Ralph Corderoy wrote: > Hi, > > As I understand it, an IDE hard drive can be reset in three ways. A > power-on reset, a hard reset caused by pin 1 (RESET-) on the IDE > connector, and a soft reset (bit SRST in the device control register). > RESET- is held low on a power on, but can also be used later to do a > hard reset.
The RESET pin is often wired to the system RESET signal, so there is no way to control it separately. -- Ondrej Zary - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
