On Monday 23 April 2018 16:40:26 Dmitry Torokhov wrote: > On Wed, Apr 18, 2018 at 01:40:30PM +0200, Pali Rohár wrote: > > Dmitry, ping > > Applied, thank you. Can you tell me if I am missing anything else for > ALPS?
Hi! All remaining ALPS patches should be already processed. > > Thanks! > > > > > On Wednesday 21 March 2018 17:41:26 Pali Rohár wrote: > > > That is pity, but OK. > > > > > > Anyway, as wrote patch which I sent in the first email matches this > > > documentation. > > > > > > Dmitry, can you review/comment/accept/reject this patch? > > > > > > On Monday 19 March 2018 08:41:19 Masaki Ota wrote: > > > > Hi, Pali, > > > > > > > > v3/v6 devices are T3 type, and it can use only Method 2. > > > > P36 (At this time GLIDEPOINT_T3 uses the Method 2 ....) > > > > T3 has the potential that uses Method2, but I think it needs to change > > > > Firmware. > > > > > > > > Best Regards, > > > > Masaki Ota > > > > -----Original Message----- > > > > From: Pali Rohár [mailto:pali.ro...@gmail.com] > > > > Sent: Friday, March 16, 2018 7:58 PM > > > > To: 太田 真喜 Masaki Ota <masaki....@jp.alps.com> > > > > Cc: Dmitry Torokhov <dmitry.torok...@gmail.com>; > > > > linux-in...@vger.kernel.org; linux-kernel@vger.kernel.org > > > > Subject: Re: [PATCH] Input: alps - Demystify trackstick initialization > > > > for v3 and v6 protocols > > > > > > > > Great, thank you. Enabling that RAW/extended/SP4 mode is done by > > > > sequence E6, E6, E6, F3, C8, F3, 14 (written in page 35) and it matches > > > > what function alps_trackstick_enter_extended_mode_v3_v6() in my patch > > > > is doing. So is correct. > > > > > > > > On page 36 I see that there is described Method 1 for reporting stick > > > > data which prevents cursor jumps. Seems that kernel uses Method 2. > > > > Method 1 depends on some prioritization. > > > > > > > > Do you have some information how to activate Method 1? Sometimes I > > > > observe that problem with "cursor jumps" and from Method 1 could > > > > prevent it. So I would like to try experimenting... > > > > > > > > On Wednesday 14 March 2018 23:56:46 Masaki Ota wrote: > > > > > Hi, Pali, > > > > > > > > > > I have added Appendix. > > > > > According to this spec documents, SP raw mode is SP 4 byte mode. > > > > > I think Extended mode meaning is almost all the same as Raw mode. > > > > > The description of how to set is written in Page 35. > > > > > > > > > > Best Regards, > > > > > Masaki Ota > > > > > -----Original Message----- > > > > > From: Pali Rohár [mailto:pali.ro...@gmail.com] > > > > > Sent: Thursday, March 15, 2018 7:58 AM > > > > > To: 太田 真喜 Masaki Ota <masaki....@jp.alps.com> > > > > > Cc: Dmitry Torokhov <dmitry.torok...@gmail.com>; > > > > > linux-in...@vger.kernel.org; linux-kernel@vger.kernel.org > > > > > Subject: Re: [PATCH] Input: alps - Demystify trackstick > > > > > initialization > > > > > for v3 and v6 protocols > > > > > > > > > > Hi! Thank you for information. > > > > > > > > > > Your PS/2 Aux Port Control description seems to really matches. Just > > > > > there is reverse order of bits. Bit 0 in description is highest, > > > > > therefore matches BIT(7) macro. > > > > > > > > > > Bit 6 in description (BIT(1) in code) describes SP Extended Mode > > > > > which alps.c enabled. And in that description is written: > > > > > > > > > > "If 1 SP is extended packet format (driver must set SP raw mode and > > > > > GP absolute mode)." > > > > > > > > > > Do you have any idea what "SP raw mode" is? How to set it? For me it > > > > > looks like it could be that extended mode of trackstick itself. > > > > > > > > > > "GP absolute mode" I guess is GlidePoint absolute mode, therefore > > > > > enable > > > > > 6 byte absolute mode for touchpad. > > > > > > > > > > And for Bit 7 (BIT(0)) is written: > > > > > > > > > > This bit is used with the PS/2 Aux port to use the Pass-Thru mode ( > > > > > see appendix A ). Do you have some information about this appendix A? > > > > > > > > > > On Wednesday 14 March 2018 10:21:43 Masaki Ota wrote: > > > > > > Hi, Pali, > > > > > > > > > > > > I just picked up the spec which relates with trackstic. > > > > > > > > > > > > Best Regards, > > > > > > Masaki Ota > > > > > > -----Original Message----- > > > > > > From: Pali Rohár [mailto:pali.ro...@gmail.com] > > > > > > Sent: Tuesday, March 13, 2018 8:14 AM > > > > > > To: 太田 真喜 Masaki Ota <masaki....@jp.alps.com>; Dmitry Torokhov > > > > > > <dmitry.torok...@gmail.com> > > > > > > Cc: linux-in...@vger.kernel.org; linux-kernel@vger.kernel.org > > > > > > Subject: Re: [PATCH] Input: alps - Demystify trackstick > > > > > > initialization for v3 and v6 protocols > > > > > > > > > > > > Masaki, if you have access to the internal ALPS v3 / Rushmore > > > > > > documentation, I would like to have a review of this patch or > > > > > > confirmation of those information :-) > > > > > > > > > > -- > > > > > Pali Rohár > > > > > pali.ro...@gmail.com > > > > > > > > -- > > > > Pali Rohár > > > > pali.ro...@gmail.com > > > > > > > -- > > Pali Rohár > > pali.ro...@gmail.com > -- Pali Rohár pali.ro...@gmail.com
