[PATCH] serial: 8250_early: Setup divider when uartclk is passed

[Michal Simek]

device->baud is always non zero value because it is checked already in
early_serial8250_setup() before init_port is called.

Fixes: 0ff3ab701963 ("serial: 8250_early: Only set divisor if valid clk & baud")
Cc: stable <sta...@vger.kernel.org>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/tty/serial/8250/8250_early.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_early.c 
b/drivers/tty/serial/8250/8250_early.c
index ae6a256524d8..5cd8c36c8fcc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -122,7 +122,7 @@ static void __init init_port(struct earlycon_device *device)
        serial8250_early_out(port, UART_FCR, 0);        /* no fifo */
        serial8250_early_out(port, UART_MCR, 0x3);      /* DTR + RTS */
 
-       if (port->uartclk && device->baud) {
+       if (port->uartclk) {
                divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
                c = serial8250_early_in(port, UART_LCR);
                serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
-- 
2.17.0