* Pavel Machek <pa...@ucw.cz> [180410 11:00]: > On Mon 2018-04-09 07:08:47, Tony Lindgren wrote: > > * Dan Williams <d...@redhat.com> [180408 02:46]: > > > On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote: > > > > I tried --location-enable-gps-unmanaged , but that did not work for > > > > me. > > > > > > That requires a TTY that would spit out the GPS data; in this mode MM > > > only sends the start/stop commands, and what comes out the GPS TTY is > > > undefined (at least by MM). > > > > > > So unless you know that one of the 6600's TTYs does GPS and in what > > > format it does GPS, then no. > > > > There should be a NMEA port within the unknown port range ttyUSB[123]. > > > > Is there some easy way to enable --location-enable-gps-unmanaged for > > testing so I can check if GPS gets enabled for one of the ports? > > This should be userful for testing: > > Just pass --pds-start-gps and you should get NMEA on stdout.
Hmm maybe also try to check if enabling the GPS this way starts printing something out of /dev/ttyUSB[123]? Regards, Tony
