[PATCH] serial: xuartps: Fix the early_console junk character issue

[Michal Simek]

From: Nava kishore Manne <nava.ma...@xilinx.com>

In the early_console_setup is trying to access the unregister clock value,
so we are receiving some garbage clk value because of this wrong clk value
the early_console_setup is fail to set the required console baud rate.

This path fix this issue.

Signed-off-by: Nava kishore Manne <na...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/tty/serial/xilinx_uartps.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c 
b/drivers/tty/serial/xilinx_uartps.c
index 19d370779767..4176c3a0b4e8 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1130,34 +1130,9 @@ static void cdns_early_write(struct console *con, const 
char *s,
 static int __init cdns_early_console_setup(struct earlycon_device *device,
                                           const char *opt)
 {
-       struct uart_port *port = &device->port;
-
-       if (!port->membase)
+       if (!device->port.membase)
                return -ENODEV;
 
-       /* initialise control register */
-       writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
-              port->membase + CDNS_UART_CR);
-
-       /* only set baud if specified on command line - otherwise
-        * assume it has been initialized by a boot loader.
-        */
-       if (device->baud) {
-               u32 cd = 0, bdiv = 0;
-               u32 mr;
-               int div8;
-
-               cdns_uart_calc_baud_divs(port->uartclk, device->baud,
-                                        &bdiv, &cd, &div8);
-               mr = CDNS_UART_MR_PARITY_NONE;
-               if (div8)
-                       mr |= CDNS_UART_MR_CLKSEL;
-
-               writel(mr,   port->membase + CDNS_UART_MR);
-               writel(cd,   port->membase + CDNS_UART_BAUDGEN);
-               writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
-       }
-
        device->con->write = cdns_early_write;
 
        return 0;
-- 
1.9.1