Ingo Korb wrote:
> > > Should I test it with an EC8/64-PCI? The /32 (ab)uses an IDE controller
> > > chip as PCI interface, the /64 uses a PLX PCI9050.
> >
> > I don't undestand this. IDE grabs the device? This is possible and if yes,
> > I'll fix the IDE driver.
>
> Yes, IDE (specifically: generic IDE PCI support, generic.ko - not
> compiled into my kernel) can grab the device. It's using an IDE
> controller chip that reports itself as such, so that's not completely
> unreasonable.
Good, thanks for the info.
> > Could you please try the patch below?
>
> Oopsed:
>
> === Cut ===
> Unloading Stallion Multiport Serial Driver: version 5.6.0
> Stallion Multiport Serial Driver: version 5.6.0
> stallion 0000:00:0b.0: please, report this to LKML: 100b/d001/ffffff
> STALLION: EC8/32-PCI found, board=0 io=d200 irq=17 nrpanels=1 nrports=8
> BUG: unable to handle kernel NULL pointer dereference at virtual address
> 00000074
Okay, tty alloc after pci init, attached patch should fix it. Could you
retest?
> > stallion, don't fail with less than max panels
>
> I could try with more than one panel if neccecary - I think I have four 8-
> Port-Panels, one 8-Port-XP-Panel (different UART) and one 16-Port-Panel
> stored somewhere.
Doesn't matter, needs fix anyway.
--
stallion, alloc tty before pci devices init
this causes oops, because pci prboe function calls tty_register_device for
each device found.
Signed-off-by: Jiri Slaby <[EMAIL PROTECTED]>
---
commit f6d5d1877b0f7ac82f5e1fec2ead0429eeb069c8
tree 31beaaee84ef718acc5401b3cb07a7f2e340f0fe
parent a6c3fb453e98ba32291a4fc5a7d843fb27359182
author Jiri Slaby <[EMAIL PROTECTED]> Mon, 04 Jun 2007 10:39:41 +0200
committer Jiri Slaby <[EMAIL PROTECTED]> Mon, 04 Jun 2007 10:39:41 +0200
drivers/char/stallion.c | 73 ++++++++++++++++++++++-------------------------
1 files changed, 34 insertions(+), 39 deletions(-)
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 9820f49..45bf2a2 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -4714,6 +4714,29 @@ static int __init stallion_module_init(void)
spin_lock_init(&stallion_lock);
spin_lock_init(&brd_lock);
+ stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
+ if (!stl_serial) {
+ retval = -ENOMEM;
+ goto err;
+ }
+
+ stl_serial->owner = THIS_MODULE;
+ stl_serial->driver_name = stl_drvname;
+ stl_serial->name = "ttyE";
+ stl_serial->major = STL_SERIALMAJOR;
+ stl_serial->minor_start = 0;
+ stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
+ stl_serial->subtype = SERIAL_TYPE_NORMAL;
+ stl_serial->init_termios = stl_deftermios;
+ stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(stl_serial, &stl_ops);
+
+ retval = tty_register_driver(stl_serial);
+ if (retval) {
+ printk("STALLION: failed to register serial driver\n");
+ goto err_frtty;
+ }
+
/*
* Find any dynamically supported boards. That is via module load
* line options.
@@ -4743,13 +4766,9 @@ static int __init stallion_module_init(void)
/* this has to be _after_ isa finding because of locking */
retval = pci_register_driver(&stl_pcidriver);
- if (retval && stl_nrbrds == 0)
- goto err;
-
- stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
- if (!stl_serial) {
- retval = -ENOMEM;
- goto err_pcidr;
+ if (retval && stl_nrbrds == 0) {
+ printk(KERN_ERR "STALLION: can't register pci driver\n");
+ goto err_unrtty;
}
/*
@@ -4760,43 +4779,18 @@ static int __init stallion_module_init(void)
printk("STALLION: failed to register serial board device\n");
stallion_class = class_create(THIS_MODULE, "staliomem");
- if (IS_ERR(stallion_class)) {
- retval = PTR_ERR(stallion_class);
- goto err_reg;
- }
+ if (IS_ERR(stallion_class))
+ printk("STALLION: failed to create class\n");
for (i = 0; i < 4; i++)
class_device_create(stallion_class, NULL,
MKDEV(STL_SIOMEMMAJOR, i), NULL,
"staliomem%d", i);
- stl_serial->owner = THIS_MODULE;
- stl_serial->driver_name = stl_drvname;
- stl_serial->name = "ttyE";
- stl_serial->major = STL_SERIALMAJOR;
- stl_serial->minor_start = 0;
- stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
- stl_serial->subtype = SERIAL_TYPE_NORMAL;
- stl_serial->init_termios = stl_deftermios;
- stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(stl_serial, &stl_ops);
-
- retval = tty_register_driver(stl_serial);
- if (retval) {
- printk("STALLION: failed to register serial driver\n");
- goto err_clsdev;
- }
-
return 0;
-err_clsdev:
- for (i = 0; i < 4; i++)
- class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- class_destroy(stallion_class);
-err_reg:
- unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
+err_unrtty:
+ tty_unregister_driver(stl_serial);
+err_frtty:
put_tty_driver(stl_serial);
-err_pcidr:
- pci_unregister_driver(&stl_pcidriver);
- stl_free_isabrds();
err:
return retval;
}
@@ -4825,8 +4819,6 @@ static void __exit stallion_module_exit(void)
tty_unregister_device(stl_serial,
brdp->brdnr * STL_MAXPORTS + j);
}
- tty_unregister_driver(stl_serial);
- put_tty_driver(stl_serial);
for (i = 0; i < 4; i++)
class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
@@ -4838,6 +4830,9 @@ static void __exit stallion_module_exit(void)
pci_unregister_driver(&stl_pcidriver);
stl_free_isabrds();
+
+ tty_unregister_driver(stl_serial);
+ put_tty_driver(stl_serial);
}
module_init(stallion_module_init);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
