Ingo Korb napsal(a): > Hi! > > The stallion driver in 2.6.21.3 put this little notice in my dmesg: > > === Cut === > Stallion Multiport Serial Driver: version 5.6.0 > stallion 0000:00:0b.0: please, report this to LKML: 100b/d001/ffffff > ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 > stallion: probe of 0000:00:0b.0 failed with error -16 > === Cut === > > The card is a EC8/32-PCI with a single connected panel. It used to work > well with 2.4, mostly well with a patched 2.6.8.1, really bad > (unstable, lost characters) with 2.6.11(?) and doesn't work at all with > 2.6.21.3. > > Should I test it with an EC8/64-PCI? The /32 (ab)uses an IDE controller > chip as PCI interface, the /64 uses a PLX PCI9050. > > lspci -vv for the EC8/32: > === Cut === > 00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev > ff) (prog-if ff) > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 17 > Region 0: I/O ports at d100 [size=8] > Region 1: I/O ports at d200 [size=4] > Region 2: I/O ports at d300 [size=8] > Region 3: I/O ports at d400 [size=4] > === Cut ===
Thanks. I will look into it, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
