Add the Device Tree binding documentation for the Microsemi Ocelot
interrupt controller that is part of the ICPU. It is connected directly to
the MIPS core interrupt controller.
Acked-by: Rob Herring <r...@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com>
---
Changes since v1:
- none
.../interrupt-controller/mscc,ocelot-icpu-intr.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
diff --git
a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
new file mode 100644
index 000000000000..b47a8a02b17b
--- /dev/null
+++
b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
@@ -0,0 +1,22 @@
+Microsemi Ocelot SoC ICPU Interrupt Controller
+
+Required properties:
+
+- compatible : should be "mscc,ocelot-icpu-intr"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the CPU interrupt controller.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+ intc: interrupt-controller@70000070 {
+ compatible = "mscc,ocelot-icpu-intr";
+ reg = <0x70000070 0x70>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
--
2.16.2
