I'll try pre4 tonight and see (could take up to 48 hours).
This is what I'm getting with test11 in my syslog (at least what I was
able to catch)
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 6
hub.c: USB new device connect on bus1/2/3, assigned device number 11
printer.c: usblp1: USB Bidirectional printer dev 11 if 0 alt 1
usb.c: USB disconnect on device 11
hub.c: USB new device connect on bus1/2/3, assigned device number 12
printer.c: usblp1: USB Bidirectional printer dev 12 if 0 alt 1
usb.c: USB disconnect on device 12
hub.c: USB new device connect on bus1/2/3, assigned device number 13
printer.c: usblp1: USB Bidirectional printer dev 13 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 13
hub.c: USB new device connect on bus1/2/3, assigned device number 14
printer.c: usblp1: USB Bidirectional printer dev 14 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 14
hub.c: USB new device connect on bus1/2/3, assigned device number 15
printer.c: usblp1: USB Bidirectional printer dev 15 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 15
hub.c: USB new device connect on bus1/2/3, assigned device number 16
printer.c: usblp1: USB Bidirectional printer dev 16 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 16
hub.c: USB new device connect on bus1/2/3, assigned device number 17
printer.c: usblp1: USB Bidirectional printer dev 17 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 17
hub.c: USB new device connect on bus1/2/3, assigned device number 18
printer.c: usblp1: USB Bidirectional printer dev 18 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 18
hub.c: USB new device connect on bus1/2/3, assigned device number 19
printer.c: usblp1: USB Bidirectional printer dev 19 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 19
hub.c: USB new device connect on bus1/2/3, assigned device number 20
printer.c: usblp1: USB Bidirectional printer dev 20 if 0 alt 1
Thats a deskjet 932C on the other end. I don't even use it in linux
:-(
As for pulling anything out of the hub, I'm not touching anything and
its securely plugged into the wall on a UPS.
Nick
--cpu info---
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 853.000658
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
features : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1690.83
-------------
--proc usb devices--
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 2 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=222/900 us (25%), #Int= 3, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 7
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=1446 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1645 ProdID=0006 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 4 Ivl= 1ms
T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0428 ProdID=4001 Rev= 2.00
S: Manufacturer=Gravis
S: Product=GamePad Pro USB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=02 Cnt=03 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1204 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 930C
S: SerialNumber=MY04S1124VJL
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=04 Dev#= 7 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05c7 ProdID=2011 Rev= 1.12
S: Manufacturer=QTRONIX
S: Product=USB Keyboard and Mouse
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 20ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=82(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=04 Cnt=05 Dev#= 8 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0428 ProdID=4001 Rev= 2.00
S: Manufacturer=Gravis
S: Product=GamePad Pro USB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=05 Cnt=06 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 1.01 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=0545 ProdID=8080 Rev= 3.0a
S: Product=USB IMAGING DEVICE
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1022 Ivl= 1ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 0 Ivl= 1ms
I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS=1022 Ivl= 1ms
T: Bus=01 Lev=02 Prnt=03 Port=06 Cnt=07 Dev#= 10 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=001e Rev= 1.03
S: Manufacturer=Microsoft
S: Product=Microsoft IntelliMouse® Explorer
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
-------------------------
On Mon, Dec 04, 2000 at 11:15:49AM -0800, Dunlap, Randy wrote:
> Envelope-to: [EMAIL PROTECTED]
> Delivery-date: Mon, 04 Dec 2000 14:17:09 -0500
> From: "Dunlap, Randy" <[EMAIL PROTECTED]>
> To: "'J. Nick Koston'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> Subject: RE: Nightly usb oops
> Date: Mon, 4 Dec 2000 11:15:49 -0800
> X-Mailer: Internet Mail Service (5.5.2650.21)
> Precedence: bulk
> X-Mailing-List: [EMAIL PROTECTED]
>
> Hi,
>
> What kernel (test10)?
> > -m /boot/System.map-2.4.0-test10 (specified)
>
> What compiler/version?
>
> Please post a list of your USB devices from
> /proc/bus/usb/devices .
>
> Are you inserting or unplugging a USB device when this happens?
> If not, are you doing anything with USB when this happens?
>
> Thanks,
> ~Randy_________________________________________
> |randy.dunlap_at_intel.com 503-677-5408|
> |NOTE: Any views presented here are mine alone|
> |& may not represent the views of my employer.|
> -----------------------------------------------
>
> > -----Original Message-----
> > From: J. Nick Koston [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, December 04, 2000 7:13 AM
> > To: [EMAIL PROTECTED]
> > Subject: Nightly usb oops
> >
> >
> > My machine crashes almost every night with this oops. I've finally
> > managed to catch it before it was totally gone.
> >
> >
> > ksymoops 2.3.4 on i686 2.4.0-test10. Options used
> > -V (default)
> > -k /proc/ksyms (default)
> > -l /proc/modules (default)
> > -o /lib/modules/2.4.0-test10 (specified)
> > -m /boot/System.map-2.4.0-test10 (specified)
> >
> > Warning (compare_maps): snd symbol pm_register not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > Warning (compare_maps): snd symbol pm_send not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > Warning (compare_maps): snd symbol pm_unregister not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0
> > EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
> ... (many STALL/CRC/Timeouts for Dev=1b, 22, 25) ...
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000014
> > c01faed6
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c01faed6>]
> > Using defaults from ksymoops -t elf32-i386 -a i386
> > EFLAGS: 00010282
> > eax: 00000008 ebx: cbd41385 ecx: cbd41380 edx: 00000008
> > esi: 00000000 edi: cfe12400 ebp: 00000001 esp: c14fdf0c
> > ds: 0018 es: 0018 ss: 0018
> > Process khubd (pid: 7, stackpage=c14fd000)
> > Stack: cbd41385 00000000 cfe12400 00000001 00000008 00000000
> > 00000009 00000000
> > 00000001 00000000 00000000 c01fb1f3 cfe12400 00000000
> > cfe12400 c5985802
> > cfe12400 00000000 cbd41380 cbd41380 c01fb7f1 cfe12400
> > 00000001 00000000
> > Call Trace: [<c01fb1f3>] [<c01fb7f1>] [<c01fcc60>]
> > [<c01fce32>] [<c0293580>] [<c0293647>] [<c01fcfa5>]
> > [<c0105000>] [<c0108c03>]
> > Code: 8b 42 0c c7 44 24 24 00 00 00 00 0f b6 72 04 39 74 24 24 0f
> >
> > >>EIP; c01faed6 <usb_set_maxpacket+46/120> <=====
> > Trace; c01fb1f3 <usb_set_configuration+e3/f0>
> > Trace; c01fb7f1 <usb_new_device+171/1d0>
> > Trace; c01fcc60 <usb_hub_port_connect_change+270/300>
> > Trace; c01fce32 <usb_hub_events+142/270>
> > Trace; c0293580 <usb_bandwidth_option+1bf8/28ec>
> > Trace; c0293647 <usb_bandwidth_option+1cbf/28ec>
> > Trace; c01fcfa5 <usb_hub_thread+45/70>
> > Trace; c0105000 <empty_bad_page+0/1000>
> > Trace; c0108c03 <kernel_thread+23/30>
> > Code; c01faed6 <usb_set_maxpacket+46/120>
> > 00000000 <_EIP>:
> > Code; c01faed6 <usb_set_maxpacket+46/120> <=====
> > 0: 8b 42 0c mov 0xc(%edx),%eax <=====
> > Code; c01faed9 <usb_set_maxpacket+49/120>
> > 3: c7 44 24 24 00 00 00 movl $0x0,0x24(%esp,1)
> > Code; c01faee0 <usb_set_maxpacket+50/120>
> > a: 00
> > Code; c01faee1 <usb_set_maxpacket+51/120>
> > b: 0f b6 72 04 movzbl 0x4(%edx),%esi
> > Code; c01faee5 <usb_set_maxpacket+55/120>
> > f: 39 74 24 24 cmp %esi,0x24(%esp,1)
> > Code; c01faee9 <usb_set_maxpacket+59/120>
> > 13: 0f 00 00 sldt (%eax)
> >
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000008
> > c013ed99
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c013ed99>]
> > EFLAGS: 00010246
> > eax: 00000008 ebx: 00000000 ecx: 0000000c edx: 00000002
> > esi: 00000000 edi: 00000000 ebp: 00000008 esp: c36f3f08
> > ds: 0018 es: 0018 ss: 0018
> > Process initlog (pid: 532, stackpage=c36f3000)
> > Stack: c36f2000 00000000 00000002 00000000 0000000c 0000000e
> > c013eec3 00000002
> > 00000008 c36f3f48 c36f3f4c c36f2000 00000002 00000002
> > 00000000 c36f2000
> > 00000000 00000000 c013f133 00000002 00000000 00000002
> > cbd41140 c36f3fb8
> > Call Trace: [<c013eec3>] [<c013f133>] [<c01203ed>] [<c010a637>]
> > Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
> >
> > >>EIP; c013ed99 <do_pollfd+29/b0> <=====
> > Trace; c013eec3 <do_poll+a3/e0>
> > Trace; c013f133 <sys_poll+233/350>
> > Trace; c01203ed <sys_nanosleep+10d/190>
> > Trace; c010a637 <system_call+33/38>
> > Code; c013ed99 <do_pollfd+29/b0>
> > 00000000 <_EIP>:
> > Code; c013ed99 <do_pollfd+29/b0> <=====
> > 0: 8b 45 00 mov 0x0(%ebp),%eax <=====
> > Code; c013ed9c <do_pollfd+2c/b0>
> > 3: 85 c0 test %eax,%eax
> > Code; c013ed9e <do_pollfd+2e/b0>
> > 5: 7c 59 jl 60 <_EIP+0x60>
> > c013edf9 <do_pollfd+89/b0>
> > Code; c013eda0 <do_pollfd+30/b0>
> > 7: e8 6b 1f ff ff call ffff1f77
> > <_EIP+0xffff1f77> c0130d10 <fget+0/30>
> > Code; c013eda5 <do_pollfd+35/b0>
> > c: 89 c6 mov %eax,%esi
> > Code; c013eda7 <do_pollfd+37/b0>
> > e: bb 20 00 00 00 mov $0x20,%ebx
> > Code; c013edac <do_pollfd+3c/b0>
> > 13: 85 00 test %eax,(%eax)
> >
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000040
> > c013ed99
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c013ed99>]
> > EFLAGS: 00210246
> > eax: 00000040 ebx: 00000000 ecx: 00000044 edx: 00000006
> > esi: 00000000 edi: 00000000 ebp: 00000040 esp: c09a7f08
> > ds: 0018 es: 0018 ss: 0018
> > Process deskguide_apple (pid: 835, stackpage=c09a7000)
> > Stack: c09a6000 00000000 00000006 00000000 00000044 00000046
> > c013eec3 00000006
> > 00000040 c09a7f48 c09a7f4c c09a6000 00000006 00000006
> > 00000000 c09a6000
> > 00000000 00000000 c013f133 00000006 00000000 00000006
> > cbd41880 c09a7fb8
> > Call Trace: [<c013eec3>] [<c013f133>] [<c010a637>]
> > Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
> >
> > >>EIP; c013ed99 <do_pollfd+29/b0> <=====
> > Trace; c013eec3 <do_poll+a3/e0>
> > Trace; c013f133 <sys_poll+233/350>
> > Trace; c010a637 <system_call+33/38>
> > Code; c013ed99 <do_pollfd+29/b0>
> > 00000000 <_EIP>:
> > Code; c013ed99 <do_pollfd+29/b0> <=====
> > 0: 8b 45 00 mov 0x0(%ebp),%eax <=====
> > Code; c013ed9c <do_pollfd+2c/b0>
> > 3: 85 c0 test %eax,%eax
> > Code; c013ed9e <do_pollfd+2e/b0>
> > 5: 7c 59 jl 60 <_EIP+0x60>
> > c013edf9 <do_pollfd+89/b0>
> > Code; c013eda0 <do_pollfd+30/b0>
> > 7: e8 6b 1f ff ff call ffff1f77
> > <_EIP+0xffff1f77> c0130d10 <fget+0/30>
> > Code; c013eda5 <do_pollfd+35/b0>
> > c: 89 c6 mov %eax,%esi
> > Code; c013eda7 <do_pollfd+37/b0>
> > e: bb 20 00 00 00 mov $0x20,%ebx
> > Code; c013edac <do_pollfd+3c/b0>
> > 13: 85 00 test %eax,(%eax)
> >
> >
> > 3 warnings issued. Results may not be reliable.
> > -
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
